PDA

View Full Version : WTS: AR NM parts for Jr


rattlebattle
05-15-2013, 04:29 PM
With the price and availability problems of AR parts , and the expense young competitors and parents face in our sport , I thought I would see if there was an interest in this Forum for these parts at a discount off what I was originally going to ask.

DPMS .223 Rem match barrel mfg by Wilson, 416 stainless, 1-8 twist. Milled flats for set screw sight base installation. I used this tube for about 8 months. I donít have a round count, but it still shot great when I replaced barrel. If I had to guess, under 2,000 rounds? It still has some good life left in it

New Mil Spec A2 front sight base. Sight base has been reamed to fit barrel. Includes new plunger, spring and 2 different width front sight posts. Sight base was set up for pins. Will need holes tapped for set screws.

NM rear sight with hood. 1/2x1/2 , I think it came off a Bushmaster DCM rifle. Used in excellent condition

Set of A2 hand guards, new

New A2 mil spec flash hider Ė if you want to bother with threading barrel

$199.00 plus actual shipping cost.

If you currently have or can get a A2 upper receiver, all you will need is a Float tube, gas tube, barrel nut , Delta ring w/ spring, retaining ring and a hand guard cap. You could then put together a National Match upper on the cheap for a junior competitor.
I would prefer parts to be used for a Jr. High Power competitor or parent. Although not required, it would be nice if you sent something indicating active participation of the Junior. If you happen to live in New England and are willing to drive, I can look into making arrangements for professional assembly of components for a nominal cost or possibly for free.
http://i1286.photobucket.com/albums/a607/tangofoxtrot1/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER005_zpsd16c67d0.jpg (http://s1286.photobucket.com/user/tangofoxtrot1/media/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER005_zpsd16c67d0.jpg.htm l)
http://i1286.photobucket.com/albums/a607/tangofoxtrot1/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER002_zpsc3ba75b7.jpg (http://s1286.photobucket.com/user/tangofoxtrot1/media/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER002_zpsc3ba75b7.jpg.htm l)
http://i1286.photobucket.com/albums/a607/tangofoxtrot1/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER004_zps0f29b0b9.jpg (http://s1286.photobucket.com/user/tangofoxtrot1/media/ar%20match%20parts/ARBARREL03A3BOLTGASCYLINDER004_zps0f29b0b9.jpg.htm l)
http://i1286.photobucket.com/albums/a607/tangofoxtrot1/a2%20nm%20rear%20sight/O3GRANDPARTS003_zpsa59d2e6f.jpg (http://s1286.photobucket.com/user/tangofoxtrot1/media/a2%20nm%20rear%20sight/O3GRANDPARTS003_zpsa59d2e6f.jpg.html)
http://i1286.photobucket.com/albums/a607/tangofoxtrot1/ar%20match%20parts/ar%20handguards/M16001_zps6bd535e7.jpg (http://s1286.photobucket.com/user/tangofoxtrot1/media/ar%20match%20parts/ar%20handguards/M16001_zps6bd535e7.jpg.html)

rattlebattle
06-03-2013, 12:57 PM
Spf

ratntat
01-19-2014, 11:47 PM
This ever sell

rattlebattle
01-22-2014, 02:49 PM
yes it did