CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   M1A/M14 (http://forums.thecmp.org/forumdisplay.php?f=101)
-   -   WTS - Rare Original GI M14E2 WALNUT Stock and Accessories (http://forums.thecmp.org/showthread.php?t=250620)

jimmieZ 08-18-2019 12:45 PM

SPF Rare Original GI M14E2 WALNUT Stock and Accessories - UPDATED
 
I have an M14E2 walnut stock that is real GI and shows minor use.The appropriate accessories are included to complete the entire M14E2 package as shown in the TM's. The stock is original, is marked with an SA on the rear where the butt plate sits and has a real GI butt plate assy. and real front fold-down grip. There aren't any numbers stamped into the metal flip-up plate. The inside of the grip is marked with FSN 7791672 with NE Inc below. It doesn't get more real than this. The stock just had a coat of tripple boiled linseed oil applied - it's not finished with a glossy cover coat. The bipod is an original M2 bipod in NOS condition and marked with FSN 760688. There is an "M" marking on the bipod feet. You won't find a nicer one. Included is the correct issued long sling with hooks for the front stock loop and the bipod loop. The muzzle compensator is the only repro item here - and is a truly excellent copy that I got 30 years ago. I assume it's a repro because it is not marked with the correct FSN. The rifle shown in the photos is NOT included.
This beautiful assemblage can be yours - but it aint cheap. I need $900 for everything shown except the rifle + actual shipping. See photos below. This is cross-posted.
If a real, FSN marked, muzzle stabilizer is required, one can be provided for an additional $100.

http://s1228.photobucket.com/user/ji...lideshow/M14E1

Thanks for looking

Jim

wags2161 08-19-2019 09:41 AM

Can u tell me what the markings are under the buttplate..Hard to tell from pics..is there a DoD stamp on it?

jimmieZ 08-19-2019 09:45 AM

Yes, it has DAS stamp.

Jim

jimmieZ 08-27-2019 10:37 AM

edited / updated - I did remove the filler plugs and then the rubber butt plate. The rear of the stock is stamped "SA" and has another mark just above and to the right of the SA. The flip-up plate is not marked.

wags2161 12-12-2019 09:57 PM

pm sent

gogs 12-13-2019 08:19 AM

Can you post some pics of the DAS and does it have a P stamp on the pistol grip
Also you state there is no stamping on the rear flipper plate correct?

jimmieZ 12-13-2019 02:34 PM

Here are the stock stamps

http://s1228.photobucket.com/user/ji...show/M14E1/DAS

Thanks

tnw50cal 12-13-2019 06:10 PM

Quote:

Originally Posted by jimmieZ (Post 1893956)

Can't see the SA one under the buttplate.
And how about pictures of the real stabilizer too.

jimmieZ 12-13-2019 06:52 PM

Here is the real stabilizer on a spare flash hider - note the FSN and unique rivet detail.

http://s1228.photobucket.com/user/ji...lideshow/M14E1

I cannot do a better photo of the SA stamp on the butt stock beneath the butt plate assembly - I'm not taking that crap off again. If this is bought and the buyer doesn't find this stamp I'll take the whole kit back - less shipping.

jimmieZ 12-14-2019 11:29 AM

SPF to wags


All times are GMT -5. The time now is 05:05 AM.