CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   M1 Garand (http://forums.thecmp.org/forumdisplay.php?f=7)
-   -   HRA Markings Charts-4.7M & 5.6M (http://forums.thecmp.org/showthread.php?t=26120)

Rolling Thunder 09-28-2010 11:17 PM

HRA Markings Charts-4.7M & 5.6M
 
All charts represent a very small overview of very specific serial ranges.
They are not the only markings possible, there could be others.

All are presented at face value and it should not be construed that all representations are original as manufactured.

https://i.imgur.com/mKplBYC.jpg?3
http://i.imgur.com/B1PrO7C.jpg?1
http://i.imgur.com/F0VwKHm.jpg?1
http://i.imgur.com/hPq0Tof.jpg?1
http://i.imgur.com/DBbBAKT.jpg?1
http://i.imgur.com/Xd5GRGS.jpg?1
http://i.imgur.com/aI8sygN.jpg?1
http://i.imgur.com/TCBDY31.jpg?1
http://i.imgur.com/9sYNUqS.jpg?1
http://i.imgur.com/LPbpZgv.jpg?1
https://i.imgur.com/HAlTFS2.jpg?2
https://i.imgur.com/q4IoA9v.jpg?2

ihcfan55 09-29-2010 06:51 AM

DRC knob
 
Thanks for posting this data. It backs up all of my data that the DRC knob was standard equipment on HRA rifles.

mozzer 09-29-2010 12:45 PM

good job, anything in the 4.75 range? i have a 4.75M Correct grade.

Rolling Thunder 09-29-2010 02:11 PM

Quote:

Originally Posted by mozzer (Post 198131)
good job, anything in the 4.75 range? i have a 4.75M Correct grade.

Mozzer,

The first chart IS in the 4.75 range.

mozzer 09-29-2010 06:02 PM

Hmm, the first one listed looks like 4.76 to me, i must not be able to see the first one. no differences then?

I have 4.754.xxx

mine does have some differences from the first 4.76. though i do feel better that my correct has no hole in the ferrule. i thought that was a mess up

Rolling Thunder 09-29-2010 08:32 PM

Quote:

Originally Posted by mozzer (Post 198327)
Hmm, the first one listed looks like 4.76 to me, i must not be able to see the first one. no differences then?

I have 4.754.xxx

mine does have some differences from the first 4.76. though i do feel better that my correct has no hole in the ferrule. i thought that was a mess up

mozzer,

About two weeks production from yours to the first listed. Makes no difference.

wgandy 09-29-2010 10:54 PM

Thanks Dave for the information. It is appreciated!

kjew 10-01-2010 12:09 PM

Hello - excuse the dumb question, but what is significant about these serial number ranges? I have 4,762,7XX and it has an HRA 5-54 barrel, D65 HRA U bolt, HRA op-rod and trigger group, HRA elevation and DRC windage knobs, and a SA stock. I ordered two SGs a few years ago and received this HRA and a SA 5.7M.

Chief 10-01-2010 01:42 PM

Where would an HRA U.W. bolt fit into the list, if at all?
Chief

mozzer 10-01-2010 04:40 PM

Quote:

Originally Posted by Rolling Thunder (Post 198445)
mozzer,

About two weeks production from yours to the first listed. Makes no difference.

Roger.

do you want my info to add to your list?


All times are GMT -5. The time now is 12:14 PM.