CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   M1 Carbine (http://forums.thecmp.org/forumdisplay.php?f=6)
-   -   M1 Carbine Picture Thread (http://forums.thecmp.org/showthread.php?t=10242)

Snake207 03-05-2010 03:32 PM

M1 Carbine Picture Thread
 
Why should the Garand folks have all the fun?!?! I think we need our own Carbine Picture Thread!!! :D

I'll start.

Quality Products Rack Grade (picked up from the South Store in Dec '09)
Configured exactly (ok, close enough) like the Carbine my Granddad carried during the war.

http://i89.photobucket.com/albums/k2...s/DSC_0037.jpg

The little kid in front of my Granddad has his Carbine.

http://i89.photobucket.com/albums/k2...s/DSC_3092.jpg


Let's see your Carbines, gentlemen!

hink441 03-05-2010 04:27 PM

Here are my Rock-Ola (top) and Inland (bottom).


http://i776.photobucket.com/albums/y...m/rockola2.jpg

hink441 03-05-2010 04:32 PM

Some other stuff also.:D

http://i776.photobucket.com/albums/y...lection019.jpg

dnikkor 03-05-2010 06:26 PM

http://i564.photobucket.com/albums/s...arbines_03.jpg

Left to right in the order received:
Standard Products w/Underwood barrel, really nice WRA stock, maybe DCM gun, nice parkerized finish, private purchase (saw this being picked up when I dropped my first carbine, also a SP, at gunsmith, now it is mine and sold the other).
IBM w/IBM barrel, mixmaster came in a M2 Potbelly, now wearing a JL-B stock, rack grade via CMP, dark finish maybe Greek? MW of 4 but surprisingly good shooter.
Underwood w/Underwood barrel, many Underwood parts, came with above mentioned JL-B stock, now in MU stock, Inland trigger housing stamped LGK 00, service grade via CMP is my main shooter and the only one with a round bolt. I recently put together an Underwood trigger group with all Underwood parts correct to manufacture date. I kept the previous Inland trigger housing & post-war guts so I can slap it back in if so desired.
Rock-ola w/Rock barrel, service grade via CMP, late war replacement WRA stock, heavily "Austrianized" mixmaster w/LGKI stamp and plum trigger housing. Leaving as received.
Inland w/Inland barrel, Bavarian Rural Police w/flip, German highwood stock, mixmaster with LGK 00 stamped Underwood trigger housing, Type A band, CMP service grade. Leaving as received. Asked for anything other than an Inland, so naturally CMP sent me an Inland.
Standard Products w/Underwood barrel, completely correct except for a four rivet replacement handguard (now replaced with correct one), stock is S-HB, flip & Type A band, private purchase pretty sure a "duffel-bag" gun. The carbine I'm most proud of.

A SG Winchester will soon join the platoon.

jeeperbob 03-05-2010 07:01 PM

Quote:

Originally Posted by hink441 (Post 78238)

That is a sweet .30 cal MG. Is it semi or full auto? I have had a serious hanker for one of those and if I ever win the lottery, look out.

MH60Mech 03-05-2010 07:01 PM

Here's my cache - all SG except for the fake M1A1 - stock was cracked in two places so I got a repo folder for it, but, rest of the rifle was SG+ (SS grab). Sent in order for SG S'G', but, sounds like I missed the cut. :cry:

http://i877.photobucket.com/albums/a...g/Carbines.jpg

L-R: Inland, Winchester, Underwood, Standard Prod., Saginaw, IBM, Underwood, NPM, Quality H.M.C., Inland, Rock-Ola, Inland Bav Rural, Qual. H.M.C. Bav Rural.

mrrm 03-05-2010 07:12 PM

Some nice looking carbines here. Be careful if you are storing your carbines, or any rifle, with a canvas muzzle cover on them. The canvas can attract moisture and may cause rust to form on the barrel. Just be sure to oil and check on occasion.

JMintzer 03-05-2010 07:37 PM

My new '44 Inland:

http://pic90.picturetrail.com:80/VOL.../383305506.jpg


Jamie

dnikkor 03-05-2010 07:37 PM

Quote:

Originally Posted by mrrm (Post 78353)
Some nice looking carbines here. Be careful if you are storing your carbines, or any rifle, with a canvas muzzle cover on them. The canvas can attract moisture and may cause rust to form on the barrel. Just be sure to oil and check on occasion.

I do, but thanks for the reminder. ;)

TRICKSTER 03-05-2010 07:41 PM

http://i487.photobucket.com/albums/r...ines3-5-10.jpg
Winchester
Underwood
Standard Products
Saginaw S'G'
Saginaw
Rock-Ola Music Co.
Quality Hardware & Machine Co.
National Postal Meter
Inland
International Business Machine Co.

ChadC 03-05-2010 09:08 PM

Here are my girls.....a quickie shot from a few months ago, I have to update.

http://img.photobucket.com/albums/v1...c/IMG_2409.jpg

Sgt. Rock 03-06-2010 09:38 AM

I'm jealous! You guys got a let someone else have a chance!

Seriously, just finished my coursework for hunters ed, filled out paperwork and had it notarized, mailed the day I finished the course . . .only to find out my order for my first Carbine will likely not be filled. Then to see the abundance of Carbines here . . . ugh. Painful.

sixpointfive 03-06-2010 09:46 AM

Try for a racker

rlexx 03-06-2010 11:59 AM

Most of them from October 2009:

http://i151.photobucket.com/albums/s...20091016M1.jpg

Manufacturer/Source - Grade/ Serial No. Range
Inland - CMP SG - 123K
Inland - CMP BR - 402K
Winchester - DCM/NRA - 1.15MM
Rock-ola - CMP SG - 1.71MM
Underwood - CMP SG - 1.38MM
Standard Products - CMP RG - 2.03MM
IBM Corp - CMP SG - 3.68MM
Saginaw SG CMP RG - 3.58MM
National Postal Meter - CMP RG - 4.14MM
Quality Hardware CMP SG - 4.83MM


The QHMC SG is back is in a M1 Stock.

Bavaria Forest Police RG (Inland 2.91 MM)

http://i151.photobucket.com/albums/s...d291BAVFP1.jpg

Saginaw SG 3.46 MM Barreled Receiver and M1A1 Stock that I built up last Christmas.

http://i151.photobucket.com/albums/s...SaginawSG1.jpg

One of the last Inland RGs received in February 2010 (6.89 MM) - mostly correct for a 1945 mfg except the flat Rock-ola bolt.
http://i151.photobucket.com/albums/s...9MMBefore1.jpg

Not in any picture is a really nice (More SG) 4.74 MM QHMC RG that sits up at my farm in VT to avoid carrying my M1 Carbines through NJ.

SSBN658 03-06-2010 12:52 PM

Repro M1A1 stock
 
Here's my M1A1 repro stock with my Inland working bits
http://i473.photobucket.com/albums/r...g?t=1267897465
http://i473.photobucket.com/albums/r...g?t=1267897614
http://i473.photobucket.com/albums/r...g?t=1267897661
http://i473.photobucket.com/albums/r...g?t=1267897705

Also have a really nice SG Bavarian Rural Police - Pure Underwood with high wood stock and type 1 barrel band, etc, S'G' SG, SG Racker, Spring Tube Winchester, and a great Rockola SG I Cut RMC stock, Mt Ranier rebuild.

Gunner945 03-06-2010 02:18 PM

I originally posted this around Christmas time; I'll share it again for this picture thread. I added an S'G' and a racker NPM since this pic; an S'G' SG order was rec'd on 2/19 and will hopefully make the CMP cut.
Bill
<a href="http://s435.photobucket.com/albums/qq77/wjferen/?action=view&current=CarbineFamily2.jpg" target="_blank"><img src="http://i435.photobucket.com/albums/qq77/wjferen/CarbineFamily2.jpg" border="0" alt="Photobucket"></a>
From top to bottom:
National Postal Meter Bavarian flip sight 1.5 mil with Underwood 7-43 barrel
Standard Products Bavarian flip sight 1.9 mil with Inland 6-43 barrel
Inland 6.4 mil with Inland undated barrel
Rock-ola 4.5 mil with Rock-ola undated barrel
IBM 2.9 mil with IBM undated barrel
Underwood 2.6 mil ('B' coded receiver) with Underwood 8-44 barrel
Inland 865k (SG receiver) with Inland 8-43 barrel
Inland 879k (SG receiver) with Inland 10-43 barrel
Inland 18k with Inland 7-42 barrel
IBM 3.8 mil (AO receiver) with IBM undated barrel
Saginaw 3.3 mil with Underwood 9-43 barrel
Standard Products 2.2 mil with Underwood 2-44 barrel
National Postal Meter 4.3 mil with IBM undated barrel
Inland 6.7 mil with Inland 1-45 barrel
Winchester 1.1 mil with Winchester undated barrel
Quality Hardware 1.5 mil with Rock-ola 3-43 barrel
Winchester 6.5 mil with Winchester undated barrel

rlexx 03-06-2010 05:38 PM

Quote:

Originally Posted by Gunner945 (Post 78948)
I originally posted this around Christmas time; I'll share it again for this picture thread. I added an S'G' and a racker NPM since this pic; an S'G' SG order was rec'd on 2/19 and will hopefully make the CMP cut.
Bill
<a href="http://s435.photobucket.com/albums/qq77/wjferen/?action=view&current=CarbineFamily2.jpg" target="_blank"><img src="http://i435.photobucket.com/albums/qq77/wjferen/CarbineFamily2.jpg" border="0" alt="Photobucket"></a>
From top to bottom:
National Postal Meter Bavarian flip sight 1.5 mil with Underwood 7-43 barrel
Standard Products Bavarian flip sight 1.9 mil with Inland 6-43 barrel
Inland 6.4 mil with Inland undated barrel
Rock-ola 4.5 mil with Rock-ola undated barrel
IBM 2.9 mil with IBM undated barrel
Underwood 2.6 mil ('B' coded receiver) with Underwood 8-44 barrel
Inland 865k (SG receiver) with Inland 8-43 barrel
Inland 879k (SG receiver) with Inland 10-43 barrel
Inland 18k with Inland 7-42 barrel
IBM 3.8 mil (AO receiver) with IBM undated barrel
Saginaw 3.3 mil with Underwood 9-43 barrel
Standard Products 2.2 mil with Underwood 2-44 barrel
National Postal Meter 4.3 mil with IBM undated barrel
Inland 6.7 mil with Inland 1-45 barrel
Winchester 1.1 mil with Winchester undated barrel
Quality Hardware 1.5 mil with Rock-ola 3-43 barrel
Winchester 6.5 mil with Winchester undated barrel

Bill:
I guess you have more than me because you are older and live closer to the North Store. Between the two of us - we could arm the Clifton Sprague security force.

It is a really nice collection.

R/
Rob

Tired Retired 03-06-2010 06:32 PM

The amount of carbines you guys have are proof that you guys are sick and should really get a life. So pack up all those guns and send them to me - I will even buy you a checkerboard so you can take up a healthier hobby...

And I had thet much spare cash I would probably need some help with a carbine addiction, too!!!

Great collections guys

Gunner945 03-06-2010 09:26 PM

Thanks Rob, you have a great looking group there also! We're fortunate to be able to preserve these historical firearms.

E-7Ret. 03-07-2010 12:09 AM

Only got two right now...
My Inland six digit

http://i264.photobucket.com/albums/i...3/IMG_0011.jpg

My 4.09 NPM

http://i264.photobucket.com/albums/i...3/IMG_0001.jpg

J.R.2009 03-08-2010 11:37 AM

Inland racker.
 
This is my latest buy from CMP, 4.9 Inland RG. Was going to give this on to my son but will give him the 6.2 Inland, my first from CMP. This one came with a "B.I." barrel, MW of 2. It also had the following Inland parts: Slide, trigger housing, bolt, Extractor, firing pin, trigger, mag release, recoil plate,stock and hand guard.
I hope these pics come through. My pic program began storing pics with a "png" in place of the "jpg". Here goes.

<img src="http://i466.photobucket.com/albums/rr30/jrmcrmo9/Parts/Inland4.png">


<img src="http://i466.photobucket.com/albums/rr30/jrmcrmo9/Parts/4.png">

Rockola 03-08-2010 07:10 PM

Here are my three service grades that I received from CMP. Bottom is a Rockola, middle is an Inland, and the top is an NPM. The Inland appears gray in the picture, but actually is very green in color. All three have dated barrels that seem to be original to the rifles.

http://i974.photobucket.com/albums/a.../triplets2.jpg.

son_of_a_gunny 03-08-2010 10:45 PM

Here is a photo I'll use as a place holder, until I get an updated one.
<a href="http://s769.photobucket.com/albums/xx331/pondcat/1943%20winchester%20US%2030%20cal%20carbine/?action=view&current=049.jpg" target="_blank"><img src="http://i769.photobucket.com/albums/xx331/pondcat/1943%20winchester%20US%2030%20cal%20carbine/049.jpg" border="0" alt="Photobucket"></a>

Jet Fixer 03-11-2010 10:05 PM

My two...
Feb 44 IBM, all correct except the rear sight
Jan 45 Inland, all correct. Now has a type 4 HI stock and matching handguard

http://s726.photobucket.com/albums/w.../1IBMSpecs.jpg

http://s726.photobucket.com/albums/w...nlandSpecs.jpg

BigBuckeye 03-11-2010 11:40 PM

My Grandfather (on the right)

http://i51.photobucket.com/albums/f398/mgriffin76/1.jpg

Rondog 03-12-2010 02:38 AM

Jeez, some of y'all really make a guy feel inferior! I feel privileged to just own ONE carbine, and one Garand. If I could just get rid of the wife.....

My '43 IBM mixmaster.

<edit> I've got a second carbine on the way! WOOHOO!

http://i18.photobucket.com/albums/b1...s/DSCN2833.jpg

epm729 03-15-2010 12:20 PM

My IBM AO Rack Grade. Shuff's re-park and a Boyd's stock set.
<a href="http://s368.photobucket.com/albums/oo129/epm729/my%20M1%20Carbine/?action=view&current=DSC00088.jpg" target="_blank"><img src="http://i368.photobucket.com/albums/oo129/epm729/my%20M1%20Carbine/DSC00088.jpg" border="0" alt="Photobucket"></a><a href="http://s368.photobucket.com/albums/oo129/epm729/my%20M1%20Carbine/?action=view&current=DSC00073-1.jpg" target="_blank"><img src="http://i368.photobucket.com/albums/oo129/epm729/my%20M1%20Carbine/DSC00073-1.jpg" border="0" alt="Photobucket"></a>

captain-03 03-23-2010 12:29 AM

http://i268.photobucket.com/albums/j...l/IMG_2522.jpg

http://i268.photobucket.com/albums/j...l/IMG_2521.jpg

Here they are from top to bottom:
International Business Machines (IBM)
International Business Machines (IBM)
Winchester
Winchester
Winchester
Underwood
Underwood
Underwood
Quality Hardware
Quality Hardware
Inland
Inland
National Postal Meter (NPA)
National Postal Meter (NPA)
Standard Products

On the Left
Rockola
Rockola

On the Right
Saginaw SG
Saginaw S’G’

PHILLYDUDE 03-24-2010 08:46 AM

never fired outside of proofing, pretty sure most people seen this,


http://s527.photobucket.com/albums/cc354/phillysaier/

mls343 03-24-2010 02:11 PM

Beautiful, Phillydude. That's as good as it gets. I still have 2 unfired ones as well.

I take it this was purchased a long time ago and is not a CMP carbine.

Nice rifle!

junfan1 03-24-2010 07:50 PM

Grandfather somwhere in France:
<a href="http://www.flickr.com/photos/25354676@N06/4461432882/" title="carbine 3 by junfan1, on Flickr"><img src="http://farm5.static.flickr.com/4040/4461432882_32ac051854_o.jpg" width="503" height="658" alt="carbine 3" /></a>

Mad_Gorilla 03-25-2010 11:38 AM

Pacific Theater 1944
 
Here's some pics of my little friends. The Japanese sword is a war souvenir my dad brought back from occupation duty. It has been restored to museum quality. The .45 is a military issue 1911 (I've worked it over a bit). The carbine is 95% correct Inland late 1944, with its big brother that I just got on March 2.


http://i1005.photobucket.com/albums/...acific_001.jpg
http://i1005.photobucket.com/albums/...acific_002.jpg
http://i1005.photobucket.com/albums/...acific_003.jpg
http://i1005.photobucket.com/albums/...acific_004.jpg

J.R.2009 03-28-2010 09:09 AM

The family is complete !
 
Heeeere's the family. At long last the carbine family is complete since receiving the Saginaw S'G' last week.

http://i466.photobucket.com/albums/r...psd1c57cff.jpg

From left to right:

Saginaw S'G' 1.8 million
Saginaw 3.4
Underwood 1.3
Standard Products 2.0
Winchester 1.2
National Postal Meter 4.1
I.B.M. 3.8
Rock-Ola 4.5
Inland 4.9
Quality Hard Ware 4.7


http://i466.photobucket.com/albums/r...letefamily.jpg

Frederick 03-28-2010 05:24 PM

My latest, like the title says S'G' RG with an Underwood 11/43 barrel and WRA low wood stockhttp://i817.photobucket.com/albums/z...4/P1010004.jpg

Vos Parate 03-28-2010 06:51 PM

Quote:

Originally Posted by Rockola (Post 80734)
Here are my three service grades that I received from CMP. Bottom is a Rockola, middle is an Inland, and the top is an NPM. The Inland appears gray in the picture, but actually is very green in color. All three have dated barrels that seem to be original to the rifles.

http://i974.photobucket.com/albums/a.../triplets2.jpg.

I noticed the Tropical Lime GTO in your trophy case. I own one of those - a full size one.

Rockola 03-29-2010 01:56 PM

Quote:

Originally Posted by Vos Parate (Post 95082)
I noticed the Tropical Lime GTO in your trophy case. I own one of those - a full size one.

I used to sell those die-casts back in the early eBay days. We would complete transactions via "in the" clear e-mails. Got lots of stories about guys and thier cars, either current or past. Best story was a guy buying a 18th 1967 Corvette convertible with a 435 Hp 427 cu in "rat motor" from me. He wanted the model to match the birthday gift his wife just gave him, the real car. Mentioned it was his 10th or 11th Corvette. Like your GTO's, my first car was a 1966 SS 396 Chevelle.

warbabys54 03-30-2010 05:03 PM

http://i624.photobucket.com/albums/t...4/DSC01020.jpg

Not the best picture, but it was quick...

'43 IBM (Birch stock BR-B)
'44 IBM
'44 Winchester/Underwood ( Rebuilt by Benicia Arsenal )
'45 (early) Inland (Type II band)
'43 Inland (rebuild)
'42 Inland

TwoGunChuck 04-01-2010 02:42 PM

Family Photo

<IMG SRC="http://lh6.ggpht.com/_ToavrBdYFmw/S7T18O-RoEI/AAAAAAAAAJE/6Hlefx-eeA0/s800/Carbines1.jpg">

RGL01 04-03-2010 08:35 PM

Quote:

Originally Posted by J.R.2009 (Post 80415)
This is my latest buy from CMP, 4.9 Inland RG. Was going to give this on to my son but will give him the 6.2 Inland, my first from CMP. This one came with a "B.I." barrel, MW of 2. It also had the following Inland parts: Slide, trigger housing, bolt, Extractor, firing pin, trigger, mag release, recoil plate,stock and hand guard.
I hope these pics come through. My pic program began storing pics with a "png" in place of the "jpg". Here goes.

<img src="http://i466.photobucket.com/albums/rr30/jrmcrmo9/Parts/Inland4.png">


<img src="http://i466.photobucket.com/albums/rr30/jrmcrmo9/Parts/4.png">

Really nice M2 stock. Hope my RG Saginaw looks as nice and also comes with a potbelly stock.

Jeremy2171 04-03-2010 08:40 PM

Shoulda got a pic of the whole carbine..... but this will have to do...

<a href="http://photobucket.com" target="_blank"><img src="http://i236.photobucket.com/albums/ff36/jeremy2171/99591001.jpg" border="0" alt="Photobucket"></a>


All times are GMT -5. The time now is 11:20 PM.