CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   CMP Bolt Action Rifles (http://forums.thecmp.org/forumdisplay.php?f=79)
-   -   Malcolm hi lux 8x scope problem (http://forums.thecmp.org/showthread.php?t=247234)

tomky 06-04-2019 01:38 PM

Malcolm hi lux 8x scope problem
 
My 1903A1 repro with a Malcolm scope has developed a "ghost image or shadow of the black", for lack of a better term. It's slight, but just enough throw me off a minute at 100 yards on some shots. The objective is still a little smudgy even after using a lens pen to clean it.
Any ideas of the cause and solution, should I use something else to clean the lens?
Any help is appreciated.

RCE1 06-18-2019 12:00 PM

I'd use a lens pen only if it was an emergency. I prefer a clean microfiber cloth with a few drops of 99% Isopropyl Alcohol to clean, then use a dry part of the cloth to polish. I think it's very important to get all the grit and dust that gets blown around outdoors off the glass prior to any rubbing with anything.

Mark1 06-18-2019 05:14 PM

It could be a lens that is separating. Looking at the front lens at a slight angle do you see a blue tint?

tomky 06-20-2019 03:20 PM

Found the resolution
 
After talking to a Malcolm tech i resolved my problem. The objective focused screwing out, it doesn't screw back in, it must be pushed back. Then you can start the focusing process again. I hope that all makes sense.

Jpm 06-20-2019 09:33 PM

That's the same way I think my Targetspot 10x works


All times are GMT -5. The time now is 10:01 PM.