CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   Mann Accuracy Device (http://forums.thecmp.org/forumdisplay.php?f=102)
-   -   1000yds with the Mann (http://forums.thecmp.org/showthread.php?t=134613)

wesvb 04-05-2014 07:18 PM

1000yds with the Mann
 
I've shot it out to 600 several times.
Today we had an informal practice at the 1000yd range so I decided to break out the Mann. I have not developed a load for 1000 in this rifle so I shot a load worked up for the M1A.
45.5g Reloader15 behind a Berger 168 Hybrid. It runs 2780 out of the M1A's 22" barrel. I figured 2750 out of the 20" mann barrel which calculated to 31.5 minutes up from the 200yd zero. That was spot on.
I only shot 20 rounds but every well broken shot was 10 or an X.
There was a couple of hinky shots because I forgot my rear bag and was using a front bag laid on its side. Not the best. If I took the time to situate everything where I wasn't straining to align the shot I got center shots.
Pleasantly surprised. I had never shot it at 1000 because I just didn't think a 20" barrel could get there.
Target pullers reported that my rounds sounded comfortably supersonic.

m1shootr 04-06-2014 07:32 AM

Impressive. WTG. Is the rifle scoped?

wesvb 04-06-2014 07:55 AM

Yes with a Weaver T36.
Harris bi-pod

Cosine26 06-07-2018 09:40 PM

Why a scope? I used to shoot a M1903 with iron sights from the prone position and M72 Ammo and could get a good 5v count. Of course I was using a Lyman 48 and not that M1905 sight. Elevation was OK with an O’Hare Mike, but windage was was a problem as it does not blow in “points”
FWIW

Smal 06-20-2018 11:05 AM

Have you got a pic or two we can see of that Mann Rifle? I've been thinking of converting mine into a rifle for long range shooting and need a few ideas


All times are GMT -5. The time now is 09:29 AM.