CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   Ammunition (http://forums.thecmp.org/forumdisplay.php?f=5)
-   -   NRA load data (http://forums.thecmp.org/showthread.php?t=3114)

red_zr24x4 12-05-2009 10:29 AM

NRA load data
 
I've seen load data from the NRA for the M1, It listed powder and charge weight. for the life of me I cant find it anywhere now. does someone have a copy of this they can post?
thanks

jarheadteacher 12-05-2009 11:22 AM

I have the article and would happily e mail it to you but I do not know how to attach it here.

If you would send me your regular e mail I do know how to attach it that way.

jarheadteacher 12-05-2009 11:51 AM

article e-mailed to you

happy shooting

red_zr24x4 12-05-2009 12:05 PM

thank you sir

red_zr24x4 12-05-2009 12:14 PM

Good article jarheadteacher, the one i was looking for had a big list of powders of the correct burn rate though,
thanks for sending it

jarheadteacher 12-05-2009 12:39 PM

sorry that article wasn't the one you sought

but

if you find the article you seek, please do e-mail it oe me also!

kentuckytroutbum 12-05-2009 12:42 PM

In my 03A3 and M1 rifles, the 1986 NRA article lists loads for the Garand, but I found that these loads were near max, as I was getting flattened primers and some cratering with HXP brass. I would consider backing down these loads and working up in small increments until you find the "sweet" spot that your rifle likes.

Hornady's 7th Edition of their reloading manual lists a number of powders and loads for the Garand. I would get a copy of it.

cache 12-05-2009 10:58 PM

I believe this what you're looking for
http://www.alabamaservicerifleteam.com/id17.html

red_zr24x4 12-06-2009 09:35 AM

cache,
very similar to the one i was looking for, thank you

X Hunter 12-06-2009 10:05 AM

Another good article
http://www.gunsandammomag.com/cs/Sat...agenum%3D2

for some reason it starts on page 2, scroll to the bottom and click to begin on page 1


All times are GMT -5. The time now is 07:19 PM.