View Single Post
Old 11-16-2019, 09:07 AM
AzMedic AzMedic is offline
Join Date: Dec 2014
Location: Arizona
Posts: 788

I'd shoot it to get a baseline, but make sure all your screws/bolts are properly tightened. The upper receiver tang if not properly clearanced and tightened properly can crack the tang area when fired - the trigger plate bolts if loose can cause the recoil lug to crack under repeated recoil - there was a comment on another thread to remove the stock, check for pitting/rust on the underside of the barrel - treat appropriately and then remount the wood stock. BTW, who's initials are on the armorer's tag (JB?) - If it was Mr Beard, I would drop him a note with your SN to see if he has anything to add from his inspection notes....
Reply With Quote