View Single Post
  #8  
Old 12-24-2018, 12:24 PM
fartblossom1953 fartblossom1953 is offline
 
Join Date: Oct 2009
Location: Newport N.C.
Posts: 776
Default

Thank you 6 RING. The action will not currently install in the plate even with banging on the floor. I have to remove the action with the plate stuck to it and knock it off with a plastic hammer. It will only go back on the same way. If I pull up on the barrel to remove the action once it's in it feels like I'm going to bend the screw or break some wood. It used to be too loose as you described and now I think it might be too tight?
Reply With Quote