Thread: M14 Ejector
View Single Post
  #2  
Old 01-24-2018, 01:45 PM
JohnF JohnF is offline
 
Join Date: Oct 2009
Location: California
Posts: 235
Default

M14 and M1 ejectors are different. M14 ejector has three angles on the face and the M1 ejector has two angles on the face. They are also different body length and stem length, but same diameter. The m14 ejector might work in the M1, but they are different for a reason. M14 ejector spring is 2.13" nominal length and the M1 spring is quite shorter at somewhere around 1.250", not sure the exact dimension. The reason for the longer spring difference, I believe, has to do with tension on the extractor when ejection occurs.

Last edited by JohnF; 01-24-2018 at 01:49 PM.
Reply With Quote