View Single Post
  #23  
Old 12-13-2017, 11:52 AM
ceresco ceresco is offline
 
Join Date: Oct 2009
Posts: 7,507
Default

NIW bolts are very inexpensive. Recovered bolts often develop stellate cracks around the firing pin hole. I remove the drill barrels by first making a 360 degree relief cut (very close to the receiver face) with a cut off saw, place the receiver in a good (big) bench vise, use two pipe wrenches across from each other on the barrel, one quick snap and the barrel comes off. Use a flat file to clean up the receiver and you are done. Never needed my lathe. Good Shooting. ...
Reply With Quote