View Single Post
  #28  
Old 12-13-2017, 01:11 PM
snuffy1a snuffy1a is offline
 
Join Date: May 2012
Location: Pittsburgh,PA
Posts: 265
Default

lemonhead's pictures are pretty close to actual welds used. My spot welds weren't quite as heavy, but in the same spot. You WILL need a replacement bolt body and firing pin tip, which can be bought fairly cheaply. I also purchased a cut-off since I cut mine when removing it. Also very cheap to buy. The rifle stock was very good and front blade perfect. I purchased mine just to see if I could restore it to operating conditions.
Reply With Quote