View Single Post
  #6  
Old 12-05-2019, 05:05 PM
New2Brass New2Brass is offline
 
Join Date: Apr 2014
Location: CT, VT and FL
Posts: 1,147
Default

If stock does not have a long channel then no modification is needed.
If it does you need to remove material for the barrel mount.

The handguard will need to be modified.
Basically the bar and barrel mount need to be installed.
Line up the handguard and mark front and rear of barrel mount to the HG with a little extra.
Then material needs to be removed to clear the barrel mount. Or you can find a modified HG online.
I can send you the procedure if you like
__________________
Carbine Collectors Club
Reply With Quote