View Single Post
  #16  
Old 12-19-2019, 04:04 PM
schutzen schutzen is offline
 
Join Date: Dec 2009
Posts: 64
Default

First off I'm assuming you have a 40XB heavy barrel model. If so there are a few things to check. Make sure the front receiver sight screws aren't touching the barrel tenon. Make sure the front receiver screw isn't touching the bottom of the tenon. Loosen the front trigger guard screw and just barley snug it up. Back off the forend tuner screws so they're not touching. Make sure the barrel is free floated. Check to make sure the crown isn't dinged. With those things done it should shoot fairly consistently. Pretty much the same applies to the 40X standard barrel except the trigger guard screw is in the middle of the floor plate. If this doesn't work I'm lost. Wayne
Reply With Quote