View Single Post
  #4  
Old 02-14-2020, 08:09 AM
epm729 epm729 is offline
 
Join Date: Oct 2009
Location: Highland, New York
Posts: 2,329
Default

Quote:
Originally Posted by navyrifleman View Post
It looks like some spot welds have broken loose, causing the top part to separate.

I would think that you could reattach it with a good Epoxy glue.
I agree with Navy, unless you know someone that has a spot welder. Clean and de-grease the areas and mix up some JB weld. Make sure you also put some on the two posts as you will need all the glue bond you can get to hold up under use. Good luck, Eddie
Reply With Quote