Go Back   CMP Forums > CMP Sales > M1A/M14
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2015, 08:56 AM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default M1A/M14 Shim set - Group Service

I hate paying TOO much for things, cheap eh maybe, I have been called worse -

So after searching around I found a source of shims based on the data in the other thread for $ 0.38 a shim shipped.

A set of five shim(s) from .003, .005, .007, .010, .020 will be $ 1.90 plus the cost of an envelope and 2x stamp.

That is the raw cost of material and shipping, why pay ten bucks plus ?!

So if you are interested you can PM me for an address where to send your SASE and $ 1.90 to and I can send off a set.

Oh, BTW if you care to drop an extra buck or two, when all is said and done, I will send that to the CMP as a donation

I am making nothing on this and I just hate paying A WAY LOT MORE FOR STUFF than need be...... So my frugality is your gain....LOL

I do not want to do this piece meal either, so if we can get a commitment of (25) I can do it all at once.



------------------


------------------

UPDATE (Round 3? ):


If anyone is interested I will be able to put together the following as a set:

(3) .003 Shims
(2) .007 Shims

This will make a total of a .023 Total shim thickness.

What I have on hand will be able to make (15) total sets. Same deal applies to cost and SASE's etc. Slots are taken as listed below:


PLEASE PUT YOUR USER NAME WHEN SENDING INFO IN

1- csm14thbn - SHIPPED
2- cav-cdr - received
3- cav-cdr - received
4- cav-cdr - received
5- scottm1a - RECEIVED
6- scottm1a - RECEIVED
7- scottm1a - RECEIVED
8- milsurpshooter - RECEIVED
9- milsurpshooter - RECEIVED
10- - threeband
11-
12-
13- rat pack - SHIPPED
14- rat pack - SHIPPED
15- rat pack - SHIPPED

---------------------------------

ROUND # 4 - Same Parameters as before except the cost of the (5) shim kit is $ 5.00 - we need a total of (25) to make it happen and SASE's are still required.


PLEASE PUT YOUR USER NAME WHEN SENDING INFO IN

1- rem870 - recieved
2- cav_cdr - received
3- cav_cdr - received
4- gm1man - Received
5- gm1man - Received
6- EODCOL - received
7- EODCOL - received
8 - ddeaton
9 - ddeaton
10 - ddeaton
11 - ddeaton
12 - GARANDPA - RECEIVED
13 - Pappy - received
14 - Pappy - received
15 - Pappy - received
16- repairman49 - SHIPPED
17- DougS - Shipped
18- DougS - Shipped
19- DougS - Shipped
20- DougS - Shipped
21- RocketDoggy - Shipped
22- DALEK
23- RocketDoggy - Shipped
24- jsudduth
25-


PLEASE PUT YOUR USER NAME WHEN SENDING INFO IN
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...

Last edited by Nickjc; 03-29-2016 at 09:52 AM. Reason: Updates for ROund/Qty/Cost
Reply With Quote
  #2  
Old 12-17-2015, 09:06 AM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default

Running total ALL CLOSED AND SHIPPED

Please note that as stated in the PM i Have sent. When I have payment for all 25 sets per run I will order them, once in I will then fill all of your SASE envelopes and drop them int he mail to you as a one shot deal.

------------------------------
ROUND 1 - (25) set(s) committed to already at (25) we pull the trigger CLOSED

Nickjc - 2

Joe - 3 - SASE ETC RECEIVED

distrflm - 3 - SASE ETC RECEIVED

garryowen - 10 - SASE ETC RECEIVED

myturn - 1 - SASE ETC RECEIVED

TLB - 1 - SASE ETC RECEIVED

ceresco - 5 - SASE ETC RECEIVED
-----------------------------------
Round Two - (25) set(s) committed to already at (25) we pull the trigger CLOSED

w1ps77 - 3 - SASE ETC RECEIVED

Topkick - 6 - SASE ETC RECEIVED

Nickg - 5 - RECEIVED IN PERSON

Drmsprks - 3 - SASE ETC RECEIVED

Pickax - 2 - SASE ETC RECEIVED

dsafron - 6 - SASE ETC RECEIVED
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...

Last edited by Nickjc; 01-18-2016 at 07:11 AM. Reason: Updated Count / Status
Reply With Quote
  #3  
Old 12-17-2015, 12:07 PM
H2O MAN H2O MAN is offline
 
Join Date: Apr 2014
Location: Georgia - US
Posts: 316
Default

what material are they made out of?
__________________
facebook.com/M14EBR.US
Don't be triggered by the word EBR - it's still an M14.
Reply With Quote
  #4  
Old 12-17-2015, 12:10 PM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default

Quote:
Originally Posted by H2O MAN View Post
what material are they made out of?
Shim, Round, 18-8 Stainless Steel, Thickness x.xxx In., Thickness Tolerance +/-0.0005 In, Outside Dia. 0.868-0.873 In, Inside Dia. 0.687-0.692 In, Tensile Strength 70, 000 PSI, Rockwell Hardness B80
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...
Reply With Quote
  #5  
Old 12-17-2015, 12:27 PM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default

OK All (25) accounted for all those that committed please send SASE etc. soon as you can.


Thanks


Nick
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...
Reply With Quote
  #6  
Old 12-17-2015, 12:44 PM
w1ps77 w1ps77 is online now
 
Join Date: Sep 2013
Location: Henniker, NH
Posts: 58
Default

Please add me to the list for 3 if you go beyond 25.
Thanks
Bill
Reply With Quote
  #7  
Old 12-17-2015, 12:52 PM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default

Quote:
Originally Posted by w1ps77 View Post
Please add me to the list for 3 if you go beyond 25.
Thanks
Bill
Hi Bill,

The only way that this is cost effective for everyone is if it is done in blocks of (25).......

If there is more interest we can do another 25 set......but we shall see....
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...
Reply With Quote
  #8  
Old 12-17-2015, 01:45 PM
Topkick Topkick is offline
 
Join Date: Jan 2012
Location: Newport News, VA
Posts: 1,460
Default

If you make another run, I'll take six sets
Reply With Quote
  #9  
Old 12-17-2015, 01:52 PM
Nickjc Nickjc is offline
 
Join Date: Mar 2011
Location: Glenwood nj
Posts: 366
Default

OK What the heck......round two....see post number 2 for count.....
__________________
Thanks ! NickJC Glenwood, NJ
9-11-01 - In memory of Mom, Loli, Gerry, Donald & Vinny...
Reply With Quote
  #10  
Old 12-17-2015, 08:40 PM
nickg nickg is online now
 
Join Date: Jun 2010
Location: franklin NJ
Posts: 496
Default

I will take 5 sets nick
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:50 PM.