Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #201  
Old 04-01-2017, 09:14 PM
Moe1a Moe1a is offline
 
Join Date: Dec 2016
Location: Colorado
Posts: 13
Default Thank you, the stock does have the 4 digits 4194 stamped in it.

That makes sense, I knew this was something much different than the couple of Tooele rebuilds posted recently. At least it doesn't have that black finish all over it. I'm going to keep the flat black front hand guard on it I think it is kind of cool for a "Sniper Rifle".
Reply With Quote
  #202  
Old 04-03-2017, 07:04 PM
Paints-n-cows Paints-n-cows is online now
 
Join Date: Jan 2015
Location: west central Illinois
Posts: 86
Default

Received my Winchester M1D Service Grade this morning.

I asked for an original finish and I think that I got it. The wood matches really well

The stock has a very faint cartouche that looks like SA/??D with a little ordnance wheel behind it. The wrist has a circle P that is also very faint. No holes where it was drilled for a cheek rest.

Barrel is 8/52 with a ME of 1 and TE of 3
Op rod is a -9
Windage is NHC
Elevation is Hex W
Trigger housing is an IHC
Hammer is HRA
Bullet guide was a -1 SA
Gas cylinder lock has no markings on it
Gas cylinder itself has a narrow front sight base but then has an "&" stamped on top of the flat spot on the rear ring
Looks like two proof marks on bottom of the receiver

Bayonet lug is marked with what I think is a partial H but its missing a leg so it looks like a T

Then there is the blue and yellow-green paint on top of the block. I was told by an CMP armorer that these rifles came straight from the Army so your guess is as good as mine.

The cartouche was really hard to figure out. If anyone has any ideas on what it says, please let me know.



Slideshow.
http://s28.photobucket.com/user/Pain.../slideshow/M1C

Last edited by Paints-n-cows; 04-03-2017 at 07:28 PM.
Reply With Quote
  #203  
Old 04-12-2017, 07:45 PM
JasonFromCT JasonFromCT is offline
 
Join Date: Jun 2013
Location: Fairfield, CT
Posts: 319
Default

Just picked mine up. WRA Sep '44. Original looking greenish GI park on everything except the op rod. No electo pen on any of the legs. ME 0 TE 2, on an SA 1952 barrel. Gas tube is pretty rough, so I'm assuming its WRA. Sight is a little dinged up. Bolt is HRA. Op Rod is SA, as is the milled trigger guard, trigger and safety. Stock is Walnut, drilled for cheek pad, but no cartouches. Has a non serif P, and a heavy duty label maker "2" on it. Scope mount shows some blue locktite residue (or something equivalent). Op Rod is marked M on the charging handle.

I'm assuming this was rebuilt by SA? Anywhere else i should be looking for markings?

Gallery:
https://postimg.org/gallery/fhfo9rgo/

Last edited by JasonFromCT; 04-12-2017 at 09:07 PM.
Reply With Quote
  #204  
Old 04-14-2017, 10:59 PM
JasonFromCT JasonFromCT is offline
 
Join Date: Jun 2013
Location: Fairfield, CT
Posts: 319
Default

Detail stripped it down. All parts aside from the bolt and receiver/barrel are early ww2 SA. Bolt is 54-56 HRA, barrel is 10-52. Scope mount has quite a bit of evidence of a scope spending time attached, but the barrel reading indicates not too many shots taken.
Reply With Quote
  #205  
Old 04-17-2017, 08:46 PM
NoseHonker NoseHonker is offline
 
Join Date: Mar 2017
Location: Connecticut
Posts: 12
Talking Wra m1d

I added a post to the general forum but wanted to officially include in the Sniper pic thread. Here is my June 1944 WRA M1D with Flame Birch stock as received from the CMP in April 2017.

https://1drv.ms/f/s!AqOVLz-yJ6Fqgmuc__JLaAdcmxge
Reply With Quote
  #206  
Old 04-20-2017, 01:25 PM
yacc44 yacc44 is offline
 
Join Date: Jul 2011
Location: Ocala. FL.
Posts: 93
Default WRA M1d

Received My Win M1d,,, No markings on stock other than small P at grip,, has screw holes for pad,,, really dry where the cheek pad was,, Hand guards almost look like some kind of gloss on them,, Has T E 11-68 etch on leg. Overall,,, very happy,,,
Reply With Quote
  #207  
Old 05-13-2017, 02:42 PM
matt92037 matt92037 is offline
 
Join Date: Jul 2016
Posts: 6
Default

Got one of my 3 M1D's cleaned up. SG Winchester receiver with what looks to be virtually 100% SA parts. Barrel was rates at 1(muzzle) and 2 (throat). The wood and metal are in excellent condition.





Last edited by matt92037; 05-13-2017 at 03:07 PM.
Reply With Quote
  #208  
Old 06-05-2017, 07:55 PM
Bryan 45 Bryan 45 is offline
 
Join Date: May 2017
Location: KY
Posts: 13
Default

Mailed order on 5/27. Received rifle 6/5. Field grade M1D. More pics to follow, but here are some interesting ones.


My eleven year old may already be laying claim to it. (He's already done his 60 push ups to correct the trigger finger placement)


And rolled up in the butt, but unfortunately the rifle serial number listed doesn't match my rifle. The stock, although real shiney, does have two holes from cheek pad screws.

Last edited by Bryan 45; 06-05-2017 at 07:57 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:32 PM.