Go Back   CMP Forums > CMP Sales > M1A/M14
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #181  
Old 09-13-2018, 10:30 PM
LiRC220 LiRC220 is offline
 
Join Date: Feb 2016
Location: Columbus, IN
Posts: 34
Default

Received my parts kit today. Mostly HRA parts. Trigger group looks brand new. OP rod has some use but not bad. Stock is in rough shape with a pretty good crack at the stock liner screw... emailed Dupage about it.

Sent from my SM-G930V using Tapatalk
Reply With Quote
  #182  
Old 09-14-2018, 08:56 AM
Jakeroub Jakeroub is offline
 
Join Date: Dec 2016
Location: Mass
Posts: 486
Default

Got mine yesterday. Stock is birch and in good shape with good metal. Handguard has small crack near front (not a problem, I think). Most of the metal parts are H&R, but I think the OP rod is Winchester (not sure). Trigger group is full of sand. At least some of the misc. small pins are bent and maybe unusable.

Does anyone have critical dimensions to check on the op rod? I'm not planning to build this up right away, and want to be sure to check things out thoroughly before putting it away.
Reply With Quote
  #183  
Old 09-14-2018, 07:04 PM
Orlando Orlando is offline
 
Join Date: Oct 2009
Location: Ohio
Posts: 9,951
Default

Quote:
Originally Posted by LiRC220 View Post
Received my parts kit today. Mostly HRA parts. Trigger group looks brand new. OP rod has some use but not bad. Stock is in rough shape with a pretty good crack at the stock liner screw... emailed Dupage about it.

Stock description:
The stock is USGI Walnut or Birch and will have dents and scratches and possibly be cracked.
__________________
"I am the master of my unspoken words, and a slave to those that should have remained unspoken. ...
Reply With Quote
  #184  
Old 09-14-2018, 07:09 PM
LiRC220 LiRC220 is offline
 
Join Date: Feb 2016
Location: Columbus, IN
Posts: 34
Default

Quote:
Originally Posted by Orlando View Post
Stock description:
The stock is USGI Walnut or Birch and will have dents and scratches and possibly be cracked.
Cracked in non-critical areas. This crack goes top to bottom all the way through.

New stock will be on it's way Monday. Dupage is A+ in my book!

Sent from my SM-G930V using Tapatalk
Reply With Quote
  #185  
Old 09-14-2018, 07:44 PM
Orlando Orlando is offline
 
Join Date: Oct 2009
Location: Ohio
Posts: 9,951
Default

description doesn't say anything about non critical areas, just says cracks
__________________
"I am the master of my unspoken words, and a slave to those that should have remained unspoken. ...
Reply With Quote
  #186  
Old 09-14-2018, 07:54 PM
LiRC220 LiRC220 is offline
 
Join Date: Feb 2016
Location: Columbus, IN
Posts: 34
Default

Quote:
Originally Posted by Orlando View Post
description doesn't say anything about non critical areas, just says cracks
Orlando you are correct, it was the Parts List included in the package that stated "The stock will have dents scratches and a possible hairline crack in a noncritical area"

Sent from my SM-G930V using Tapatalk
Reply With Quote
  #187  
Old 09-14-2018, 08:55 PM
Odhinn Odhinn is offline
 
Join Date: Oct 2009
Posts: 240
Wink

Quote:
Originally Posted by LiRC220 View Post
Orlando you are correct, it was the Parts List included in the package that stated "The stock will have dents scratches and a possible hairline crack in a noncritical area"

Sent from my SM-G930V using Tapatalk

You beat me to it! Was going to point out that bit of verbage from the blue insert, in an effort to stave off the "Hey buddy, you got what you paid for" comments that almost always seem to follow . Too bad about that stock, glad Dupage is taking care of you.

VERY happy with my kit, everything in good shape with the exception of the op rod guide PIN, sheared off in the guide. Looks like they were unable to drive it out and opted for a BFH to remove the guide from the barrel, with the pin in place. Will cost me all of a buck when I get a moment to drop by LRB.
__________________
Proud Member Since: 05/05/2007
Reply With Quote
  #188  
Old 09-14-2018, 10:17 PM
sickboybrad sickboybrad is online now
 
Join Date: Oct 2009
Location: ca 93021
Posts: 94
Default

I got my kit the other day. I got a excellent kit, this kit might be better than my original cmp kit.
I also ordered all kinds of other "junk" I didn't need too.
This was a good order, iam happy.
B
Reply With Quote
  #189  
Old 09-15-2018, 01:27 PM
Shomway Shomway is online now
 
Join Date: Apr 2012
Location: Michigan
Posts: 5,123
Send a message via AIM to Shomway
Default

Quote:
Originally Posted by Sheeple Fighter View Post
FYI, dupage has a few fiberglass stocks for sale. Cheap, 2 for $20. Grab a set set. Was going to use my birch “big red” from my kit. Turns out it’s a Winchester. With my medium weight barrel the channel needs to be inleted a bit for clearance. I would just feel bad in that stock. These fiberglass stock should fit the build better.
Dupage has these relisted......
https://www.dupagetrading.com/produc...rglass-stocks/
__________________
31- 100% ITrader feedback prior to removal.
Feedback....http://forums.thecmp.org/showthread.php?t=209950
Reply With Quote
  #190  
Old 09-15-2018, 02:38 PM
DougS DougS is offline
 
Join Date: Oct 2009
Posts: 213
Default

Quote:
Originally Posted by Shomway View Post
Out of stock as of 2:37PM EST
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:03 PM.