Go Back   CMP Forums > CMP Sales > Smallbore
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 02-22-2012, 04:34 PM
10shot 10shot is offline
 
Join Date: Feb 2012
Posts: 14
Default Bottom Plate

What Bottom plate will work on a 40X factory Stock?

Thanks, Jeff
Reply With Quote
  #2  
Old 02-22-2012, 06:26 PM
M-One M-One is offline
 
Join Date: Oct 2009
Location: North Carolina
Posts: 291
Default

I'm assuming you are refering to the "bottom plate" under where a mag well would be? If so the trigger guard is included with the mag well plate and is the same as the 722.
Reply With Quote
  #3  
Old 02-22-2012, 09:14 PM
nozero nozero is offline
 
Join Date: Oct 2011
Location: Texas
Posts: 231
Default

The 40X uses the same trigger guard as the 722- you will need the filler plate also that goes under the rear portion of the guard. The 40XB uses the same trigger guard as the 700 ADL. Both need three screws (same as ADL)

Last edited by nozero; 02-23-2012 at 01:03 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:25 PM.