Go Back   CMP Forums > CMP General > Ask Each Other > Reloading
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 02-07-2017, 06:02 PM
jtake jtake is offline
 
Join Date: Sep 2016
Location: Cali
Posts: 9
Default

Climax metal products is the actual manufacturer of the part.

2ISCC-050-037-S stainless steel http://catalog.climaxmetal.com/item/...iscc-050-037-s

2ISCC-050-037 black oxide http://catalog.climaxmetal.com/item/.../2iscc-050-037

Amazon seems to have a few, ranging from mid 30s for the black oxide to $61 for the stainless. Ebay seems to have them too, but not sure if they are knock-offs or actual brand-name parts, but at substantially lower prices it appears.

Note, some of the sites only list one of the bore diameters, which is why I included the links to the actual manufacturer parts that shows the XXXXX-050-037 parts are 1/2" and 3/8" bores.

Last edited by jtake; 02-07-2017 at 06:04 PM.
Reply With Quote
  #22  
Old 02-17-2017, 08:27 AM
milsurpriflenut milsurpriflenut is offline
Banned
 
Join Date: Feb 2017
Location: New Jersey
Posts: 60
Default

cheapest and fastest way to do all

https://www.youtube.com/watch?v=ULkmE79x5BU
Reply With Quote
  #23  
Old 03-08-2017, 09:21 AM
bote bote is offline
 
Join Date: Jan 2015
Posts: 355
Default

If you size long-necked cases like 30-06 in bushing dies you need to tell Giraud up front and probably send them a sized case so they can machine a relief in the pilot. The unsized part of the neck wedges in the pilot and I have to use a case holder to pull them out. Also, it doesn't trim consistently. Giraud told me they would cut the relief in mine for no charge, I just need to send it back.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:37 AM.