* No flaming or insulting of other members. You will get one warning via a private message. Repeat offenses will result in being banned. (We are quite serious about this folks).
* Vendor bashing will not be tolerated. You will get one warning via a private message. Repeat offenses will result in being banned.
* When posting, try to use descriptive titles for your threads to enhance the searchability of the site. Thread titles such as "Help Me" or "Dang this sucks" should NOT be used. Instead try titles like 'Need Help with Sights', 'How to Perform Stock Refinish', or 'Vibration in Handguard". This will help other people search the site with better accuracy and make it easier for people to help you out.
* Everyone has a personal opinion and they will often differ from others. If you get into an argument over something, debate the issue, not the member. If you feel the need to get into a heated discussion with someone, send them a private message. Personal debates on the forum will not be tolerated.
* Do NOT post copyrighted material on this Forum without consent of the author. This could be from another website, or a book that you personally own. The owner/Admins of this site will not be held liable for any copyright infringement of this type, and as such, will prevent (to the best of our ability) it's posting in public. This is for the protection of ALL members.
* Do NOT post any messages that are obscene, vulgar, sexually-orientated, hateful, threatening, or otherwise violate any laws. These types of messages will not be tolerated. You will get one warning via a private message. Serious offenses may result in immediate permanent suspension. Repeat offenses will result in being permanently suspended.
* Avoid thread hi-jacking. Moderators will be looking for this and will more than likely split the topic if it gets too drastic, as well as take appropriate action where deemed necessary, to include deleting posts and/or enforcement action.
Please do not post the same question or post across multiple forums, or in the same thread. The best way to get the answers you are searching for is to post a clear single question in the appropriate forum and be patient, Replies will come. If you are in a hurry for a particular answer try using the search button or reading through replies to similar questions. It may just contain the information that you need. No need to post the same information again and again as this just clogs up threads/sub-forums.
Do not bump non-Marketplace threads as that can clutter the front page of a discussion forum. Posts bumping discussion threads will be deleted.
* Any members advertising their wares on the site without expressed permission will get banned. Personal items for sale in the classifieds are ok as long as the meet the criteria laid out in the site rules.
* Do not post any info, posts or threads regarding the process of going to the estore and artificially placing a large number of items in your cart simply for the purpose of seeing what inventory remains of an item carried on the estore!
This activity slows down the estore and can cause problems with it crashing, errors with people's orders, and inventory errors, particularly during periods of high demand/traffic.
Anyone making such posts on the forum will be warned once, then have their forum privileges suspended at least temporarily for a second violation. Further violations can result in permanent suspension.
* There will be no posting of links to, or copying information from listings on outside auctions/commercial sites, i.e. -- Gunbroker, Ebay, Armslist, Craigslist, Reddit, gun trader sites, etc, that are still active/live. We will not provide a platform for members to promote said auctions as there is no viable way to determine whether they or someone they know has a stake in the auction. Posts with this information will be removed. Continual violations will result in suspension of forum privileges. You may link to closed/completed auctions in the sake of education and learning.
* Users who post fake information, i.e. - name, location, in their profile, or otherwise provide/post false information/data about themselves will be instantly banned. Users who register multiple usernames will also be removed.
* Your account may be revoked at any time for any reason.
Generally, the following enforcement policy will apply:
1st offense - warning
2nd offense - banned for one week to six month
3rd offense - banned for one year
4th offense - banned permanently
** Depending on the nature of the offense/rule violation, first offense can result in ANY of the above enforcement actions.
ADDITIONAL RULES, TO INCLUDE MARKETPLACE/CLASSIFIED AD RULES:
1. Profile Requirements
To start a sale, buy or trade thread anywhere in the Marketplace, your Profile must contain:
A. Your FIRST and LAST name as well as your STATE of residence. Your profile privacy settings must be set to at least allow registered users the ability to view your profile info, i.e. - Not set to "Friends only."
B. You must "enable receive email and PM’s" in your Control panel if you intend to buy or sell.
Additionally, you must have a valid email address listed in your registration profile (which can only be viewed by moderators/admin in the vBulletin master page).
Users with obvious fake names, or using false names in their profile will be permanently removed from the forum without warning. PLEASE NOTE: When a member has failed to put their full names and location in their profile, their ads will be deleted WITHOUT NOTICE. You are responsible enough to be involved in firearm activity, so you can be responsible enough to read and understand the forum rules. The posted rules ARE your notice as they are posted throughout the forum. Threads/ads will be restored once a member has updated their profile with first and last name, and state.
2. The Marketplace is intended SOLELY for the mutual benefit of forum members as a resource to support each other's collecting and/or shooting goals.
It is NOT intended for, and will NOT be used by members as a repeated, for-profit venture/operation. This includes:
A. Purchasing items from members on the forum, then posting them for sale at a markup/profit on other commercial sites, i.e. – eBay, Gunbroker, etc.
B. Reselling items at a considerable markup that were recently purchased from CMP.
Members found to have clearly abused this policy will lose the ability to post in and use the Marketplace, and potentially have their forum privileges suspended, temporarily or permanently.
3. You may only list personally owned items, and/or request/WTB items for yourself. “Selling (or buying) this for a friend/family member” ads, and 3rd-party sales/purchases are prohibited.
Additionally, NO posting or linking to listings on eBay, Craigslist, Gunbroker, Reddit, or other outside auction/commercial sites. We will not have the items placed here also. List your product here, try to sell it here, then take it to eBay, Craigslist, Gunbroker, auction-arms, etc.
4. There will be no “auction style” selling here…If you post an item for sale and it says anything like "I will take the highest offer" it will be removed.
We ask that you list your item on just one forum, so there is not confusion and/or issues with an item being sold on another forum when someone attempts to purchase it here. If you do list and sell on another forum, it is your responsibility to immediately update your ad on our forum…if you do not, your privilege to post in the Marketplace and even the forum itself may be suspended, at least temporarily.
NOTE REGARDING 1911 PISTOLS PURCHASED FROM CMP: If you are considering selling a 1911/1911A1 you acquired directly from CMP, you MUST obtain approval from CMP1911ADMIN before listing it on the forum as purchasers of these weapons are not allowed to resell them as a condition of the purchase. You may reach him via PM or email: [email protected]
5. Vendors (or people selling large quantities of the same item as part of a commercial venture) must first contact a moderator or admin.
6. Omission of information is also known as fraud. It is wholly the responsibility of the person listing an item to describe it ACCURATELY and TRUTHFULLY.
Example: If you are selling a rifle stock that has a 9 inch crack in it you need to disclose that information to the buyer. Do not describe the item or tell the buyer that the stock has "light scratches" only.
If we determine that you defraud a member by failing to disclose facts about your items, your access to this section will be restricted and you may be permanently banned from the forum.
7. CLASSIFIED AD REQUIREMENTS
A. Briefly describe your item in the title, along with WTS, WTT or WTB.
B. We do not have any rules regarding notification of a purchase or trade in an ad...it can be accomplished via a post on the thread, a PM, an email, a phone call, a pigeon carrier, etc. However, if you set the terms of your sale, you must follow them! We do not require or enforce any conditions of purchase; however, if a member violates their own terms then they are subject to at least suspension from the Marketplace section. For example: If you say, "First 'I'll take it' gets it," and sell to someone via PM or email without updating your ad and someone posts they'll take it, that's on you. We will not be party to a dispute, but you WILL lose your privilege to post in the Marketplace as a minimum since you failed to follow your own conditions.
C. You must list a price, and make it easily visible, not just lost in the description. Ads without a price will be deleted. It is ok to list a price and OBO (or best offer); however, no auction-style listings
D. As noted in item #4, provide ALL and ACCURATE details. i.e color, size, caliber, year, make, model, condition, defects, etc
E. Post pictures, or at least the links to them. If you are unable to post pics, then make them available via e-mail.
F. List shipping, pick-up or delivery options for the buyer, as well as cost.
G. Be sure to mark your ad as "SOLD" once the items are sold.
8. Do not bump ads older than 90 days without moderator approval. Ads older than 90 days will be locked if they get bumped.
9. Do not bump an ad more than once within a 24-hour period. Ads bumped multiple times within 24 hours will be locked or deleted. Members who continually do this will have their ads locked or deleted, and will lose your privilege to post in the Marketplace.
10. Remove previous bump posts so as to keep the size of the threads to a minimum. Nobody wants to have to search through 4+ pages of "Bump" or "ttt" posts simply to find information on the item listed.
If not removed, mods will remove them and/or delete the thread if it gets out of hand.
11. If you commit to buy or sell, please contact the seller or buyer within 24 hours with a PM or email to make arrangements.
12. If an item is sold, please mark the thread as such. This will help eliminate the old threads coming back up, as well as help those looking for specific items.
13. For WTB items anywhere in the Marketplace:
- Only respond to a WTB ad if you possess the requested item or have specific knowledge of that item’s availability. For example, do not post, “Check eBay” or “Check Gunbroker.”
- Once you have found/purchased the item(s) desired, delete the thread so as to not waste other members' time and allow for other threads to have visibility.
14. Keep the classified threads clean of extraneous/fluff comments and questions, regardless of how innocent or praiseworthy. This prevents derailing the thread and generating wasteful, opinionated discussions, as well as surreptitious bumping of threads.
If you have a technical or knowledge question relating to a listed item, start a new thread or search and add to an existing thread.
If you want to thank or praise a seller or item, DON'T do it in the sale thread as it unnecessarily bumps a stale thread, and said comments will be deleted. Instead, do the person the courtesy of posting in the Buyer/Seller Feedback section here: http://forums.thecmp.org/forumdisplay.php?f=81
Basically, if you don't have a question DIRECTLY related to a sale/trade/purchase of a specific thread, don't post! And this particularly applies to stomping a member’s ad concerning their asking price as there is a tendency to post negative replies when someone lists an item for sale that others consider overpriced.
We will not tolerate members stomping another member's ad concerning their asking price.
This also includes posting low-ball offers. If you want to make an offer lower than the asking price, even if it states OBO, do it via PM or email.
If an item is sold and the listing member deleted the price (which is their prerogative) and you want to know what the price was, do NOT post in the thread…send the member a PM.
Those who continually stomp or hijack other member's ads will face temporary, and even permanent suspension of their forum privileges.
15. No duplicate or multiple threads in different sections for the same item. Pick one section, the most applicable, and post there. Additional duplicate threads will be deleted.
16. You may not use the signature block function to solicit purchases, trades and/or sales. That is why we have the Marketplace...post a thread with your specific WTB, WTS, WTT ad.
You may have up to two lines stating you are looking or searching for a particular rifle/weapon and serial number.
As with individual posts, signature blocks/lines are subject to the same forum rules and will be handled accordingly if they violate any forum rules, policies/procedures or take up too much room of a post.
OTHER TIPS/GUIDELINES
- Buyers and Sellers should verify each other’s identity before sending money and/or products. If possible, get each other’s phone number and have a quick conversation to confirm the transaction details.
- As a suggestion: sellers should consider using delivery confirmation to avoid conflicts from buyers; saying they never received the products.
- Buyers, get to know the seller a little before you blindly send cash. If something does not seem right; it probably isn't. If something seems too good to be true; it probably is. Contact a moderator or report a thread/post that appears to be a scam.
- Respect fellow members. This section is a great place to support/help out fellow members and occasionally make new friends. Please be respectful to your fellow members. Maybe try selling here to a member instead of eBay, maybe save them a buck or two. If you have any questions, problems or concerns feel free to contact a moderator or admin.
- We do not require members to keep ads, or keep a listing price in the thread. It is your ad, so you are free to delete it at your discretion, as well as remove the asking price if you so desire. If someone is curious about the price for what an item sold, contact the seller via PM…do NOT post in thread.
- Lastly, don't forget the <b>Buyer/Seller Feedback section</b> http://forums.thecmp.org/forumdisplay.php?f=81
Be sure to express a good or bad experience with your buyer or seller, and let others know what to expect. Also be sure to check there for a member if you are concerned BEFORE you buy.
MODERATION RULES/ENFORCEMENT
1. All spammers get banned instantly and permanently.
2. Inappropriate or out of hand threads shall be closed with or without reason posted for the closure or deleted at the discretion of the Mods/Admins.
3. If you cannot follow the rules set forth, your posts may be deleted, removed, or edited by the Moderators.
4. If you repeatedly do not follow the rules set forth, you will be banned from this section or from the CMP Forum for any length of time from 2 days to permanently, at the discretion of the Moderators.
NOTE: These rules can change at any time. Administrators and Moderators have the right to make any decision that fits the website and its users.
DISCLAIMER
The CMP, any of its staff and forum administrators/moderators assume NO liability or responsibility for Marketplace transactions. Members will use at their own risk, and CMP will not be responsible for any disputes or claims between members involving a transaction.
The Civilian Marksmanship Program forum is intended primarily to be a technically-oriented website for professional, courteous, and intellectual discussion of CMP matches, activities, firearms and related events. We are an online community founded by enthusiasts, for enthusiasts, of all ages and walks of life. Remember that we have youth CMP participants who view this site. Please enjoy your stay and with your help, we can make the CMP Forums safe for all.
The opinions and posts on this site do not necessarily reflect those of The Civilian Marksmanship Program.
If you have any questions, please contact a Moderator
I've seen several pictures posted where folks have colored (usually with white) the markings on the sights which makes them much easier to see.
What product is being used to do the coloring and what procedure to do it?
Folks use an assortment of things, but usually paint (like the enamel used in model building) or nail polish if they wish the job to last.
Whenever I paint sights, I carefully tape-off the areas where I do not want the paint (if I perceive the possibility that it may migrate) ... I also leave a tab on the tape so that I can easily remove it right after I apply the paint.
I often use toothpicks to apply the paint.
TIP: If you want to paint your blued sights something other than white, first paint them white (and allow them to dry) before applying the color paint. The white "base" brightens the color.
Grease pencil or China marker won't last. Buy a paint pen from Home Depot or a small bottle of white model paint. Paint over the numbers, letters to fill in the stampings. let dry and wipe off the excess around the stampings lightly with a cloth dampened with brake cleaner.
Brownells sells lacquer paint pencils that are used for this purpose (white is probably most common). There is a technique to doing this without making a mess.
my method:
- cleand area around the lettering with alcohol
- rub the paint pen into the lettering recess (just smear it in so all recessed areas are covered well).
- with a peice of cardboard (like the stiff back of a note-pad), wipe off the excess. The cardboard acts like a flat surface and will allow the paint to stay in the recess. Always use a fresh peice with each wipe.
- use Mineral Oil on a que-tip and remove the color haze left by the wiping. Be careful not to get the oil on the paint you want to leave since it will break it down as well.
On the cleanup, I normally do as good as I can and then lket it sit for a day or so to let the paint "set". Then I go back and do the detail cleanup.
Paint will set hard in a few days. Cleanup will be much harded if you wait too long.
If you screw it up, no problem, just start over. A couple trys and you will be an expert.
RATS! I read that as just sights, sorry! Yes grease pencil or lacquer stick as already mentioned.
I have also used the model enamel on a few. While doing the enamel is more labor intensive, it may be a bit more permanent.
I found that the key to painting them is the "wipe clean" approach. If you use cloth or the like it will not only remove the excess but also the paint in the markings.
I cut up pieces of paper (old printer rejects) and use those, with a drop or two of low odor mineral spirits applied as the clean-up medium for wiping away excess.
With this method, each location requires multiple "wipes". Each piece of paper can be used for a single wipe, otherwise you will just make a mess.
Back in the '50s when I worked in a shipyard they had paint sticks that looked like a crayon.The steel workers marked up the plates to be welded with regular crayons whic the painters had to remove before painting. When the paint sticks were subsequently used they could paint over them. I had one of those for marking my guns which lasted many years. ( the sticks that is.When the tip dried over you just scrape it back a little and your good to go.)
I use heat gun or hair dryer and white crayon,
Heat up the metal surface (not too hot), melt the crayon into the grooves, wipe off excess, buff off the haze with a napkin.
I use a paint pen. After the paint dries I lightly wipe with acetone and the paint remains in the lettering if wiped lighly enough. I have some sights done this way years ago and it has held up well.
I use a paint pen. After the paint dries I lightly wipe with acetone and the paint remains in the lettering if wiped lighly enough. I have some sights done this way years ago and it has held up well.
I just finished marking my M1 and M1A sights using this same method. Worked out very well. Eddie
Oil based Sharpie in the color(s) of choice. Works best if degreased with alcohol first, let dry, then apply a coat and if needed a second coat after the first one dries.
You can use a white base and then a second coat of yellow, red or ??????
If you wish to remove it, then use alcohol again and rub it off.
Comment