![]() |
![]() |
![]() |
||||
![]() |
![]() |
![]() |
![]() |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]()
Once-fired military brass should not split. For that matter, many-times-fired military brass should not split. There is almost nothing you can do to military brass to make it split at the head consistently except load it very, very hot. Pull a few bullets and weigh some powder charges. You may be unpleasantly surprised.
I would not shoot this stuff at all without replacing the powder charges.
__________________
NRA-certified rifle (40 years), pistol, home firearms safety, and personal protection instructor NRA-certified range safety officer North Dakota and Maryland certified hunter safety instructor ACEP-certified coach |
#12
|
|||
|
|||
![]()
A head split will wreck a bolt gun as thoroughly as it will wreck a gas gun.
__________________
NRA-certified rifle (40 years), pistol, home firearms safety, and personal protection instructor NRA-certified range safety officer North Dakota and Maryland certified hunter safety instructor ACEP-certified coach |
#13
|
|||
|
|||
![]()
I have three boxes of atomic 308 Match ammo.
It is labeled as Nosler Custom Competion 168 gr HPBT. So 300 rounds of this stuff. No lot number ... Is this the same ammo that you are reporting as bad Has there been any recall on this ammo? You guys are freaking me out. I do not want to have a desaster. Maj |
#14
|
|||
|
|||
![]()
I am curious why no recall?
|
#15
|
|||
|
|||
![]()
Case in question was stamped LC09. My coach was a retired Marine Gunny. She immediately came over after I fired and asked what the hell happened? It was definetely loaded hot and she agreed. My atomic ammo is mixed lake city as well as other makers. Like I said, I'm tearing mine down and reloading. I have fired many rounds of this with no problems. I had an incident last year at the m1a match where debris came back in my face after firing. It got my attention. I thought maybe a blown primer at the time. Looking back, it was another overcharged case.
|
#16
|
|||
|
|||
![]()
You would have to ask Atomic. I would speculate a recall would put them out of business, which has happened before to small makers. After all, their FAQ does say their ammunition will accelerate wear on your firearm. A blowup is just "accelerated wear." You have been warned.
__________________
NRA-certified rifle (40 years), pistol, home firearms safety, and personal protection instructor NRA-certified range safety officer North Dakota and Maryland certified hunter safety instructor ACEP-certified coach |
#17
|
|||
|
|||
![]() Quote:
|
#18
|
|||
|
|||
![]()
Got a couple cans when the CMP first started selling them
Reloads supposedly once fire brass Shot some ok Had some with over pressure problems blown primers And blew a couple of mag bottoms out I still have a can and reluctant to shot in my M1A What should I do about it? 200 rounds afraid to shoot |
#19
|
|||
|
|||
![]()
There is a older post from a few weeks ago you need to check it out.I cannot go back at this time to find it sorry.We had a head split that was real bad.
|
#20
|
|||
|
|||
![]()
OSU
Thanks Did a search saw a lot Even saw my original post 1-24-15 I think I'm gonna call the CMP again about it Maybe they were too busy to respond before now that the' re outta rifles they may have more time to deal with it |
![]() |
Thread Tools | |
Display Modes | |
|
|