Go Back   CMP Forums > Marketplace > Junior Shooting Rifles/Equipment
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Old 09-02-2018, 08:06 PM
BRMPCF50 BRMPCF50 is offline
Join Date: Dec 2013
Location: Central MO
Posts: 161

See post#8.

Private message me with your e-mail address and I'll be happy to email you pdfs of the relevant pages from the Remington Service Manual and the US Army Technical Manual TM 9-1005-206-14P/4, Operator, Organizational And Field Maintenance Repair Parts and Equipment for Commercial Rifles
Reply With Quote
Old 09-25-2018, 12:35 AM
navyrifleman navyrifleman is offline
Join Date: Nov 2009
Posts: 133

I have a few Remington 513-T rifles and have seen this same problem on some of them. I think that the problem could be with the bolt itself. If you look at the bottom of the bolt (when handle is up and ready to draw bolt back) you might see a small chip at the end of the groove on the bolt where it connects with the sear. That may be causing the bolt to skip over the sear and pull out of the receiver.

On rifles that have that problem, the only solution I have found is to be careful when ejecting the spent shell. Only pull the bolt back lightly, and don't force it with all your might.

Bolts can be switched out with another 513T to see if the problem (of pulling out) repeats, but don't actually fire any shells with the bolt from another rifle unless you check the head space. I have found that some bolts will function mechanically, but fail to fire when switched to another rifle. Also, you might experience blow back from a poorly headspaced bolt.

If your bolt itself is the problem, I do not know if it can be repaired or will have to be replaced. You might ask one of the CMP armorers about it.
Reply With Quote
Old 01-05-2019, 05:00 AM
Atoz Atoz is offline
Join Date: Dec 2009
Location: Michigan
Posts: 37

Had the same problem. Exchanged the bolt with CMP. Took awhile as they had to find similar one to give good head space.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 05:20 PM.