Go Back   CMP Forums > CMP General > Talladega Marksmanship Park
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 09-01-2015, 10:35 AM
cab308 cab308 is offline
 
Join Date: Mar 2010
Posts: 8
Default Talledaga 600 schedule?

Seems to be a lack of match bulletin for the 600. Does anyone know:
1. For new shooters, I understand that a range orientation is required. When, where and how long?
2. What time do we have to show up for am and pm matches?
Need to do some planning.
Reply With Quote
  #2  
Old 09-01-2015, 03:21 PM
K31Schmidt K31Schmidt is offline
 
Join Date: Mar 2013
Location: Alabama
Posts: 734
Default

Range orientation is in the meeting hall just to the left when you walk in the main entrance, takes 15 min and is repeated all day every 15 to 30 minutes. If you are not in the SAFS (Tuesday) and arrive that day get all of this done then, otherwise do the following.

Arrive early for the first day to complete registration (7:00 to 7:30). Not sure what actual time the gate will open. Get in line and they will ask who is am and has not had a range orientation, those will be bumped up in the line.

When you have a relay time 1 to 1.5 hours before is good so you don't have to rush.

Take your rifles/pistols to the armorer trailer to get rifles inspected and taped.
Usually it's on the right side of the main building. They have tables set up a few feet away from the trailer. Take the rifle/pistol case to one of the tables and only get in line with rifle/pistol in hand (ECI inserted). Then follow instructions.

Make sure what relay you verify for.
Example Relay 1 shoots, while Relay 2 verifies.
Relay 2 shoots, Relay 1 verifies.
Then 3 -- 4, 4--3, and so on.
So if you are on relay 2, arrive as if you were on relay 1

The D-Day match we had the option of picking a relay when registering, don't think that is going to happen again. You will register online and then get assigned a relay when you check in.

This is all we have to go by http://thecmp.org/wp-content/uploads...vent-Draft.pdf
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:00 PM.