Go Back   CMP Forums > CMP Sales > M1A/M14
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-27-2018, 09:09 AM
seaventure seaventure is offline
 
Join Date: Mar 2011
Location: Camden Michigan
Posts: 28
Default Assembly Question

I am building first M1A from Bula receiver pkg. Question is, when I try to push in pin that holds spring guide into receiver, it wont go all way in. It is GI M14 part new. hole on left side of receiver seems smaller than right. Pin is not shouldered ??

Any thoughts?

John
Reply With Quote
  #2  
Old 12-27-2018, 09:41 AM
jcj54 jcj54 is offline
 
Join Date: Jul 2013
Posts: 44
Default Pin hole

Hole is smaller on one side. It is there to use a punch to push the pin if need be to get the spring guide out. Pin does not enter the small hole side.
Reply With Quote
  #3  
Old 12-27-2018, 09:47 AM
seaventure seaventure is offline
 
Join Date: Mar 2011
Location: Camden Michigan
Posts: 28
Default

Thanks,

That being said, then head of pin protrudes from receiver wall 1/8 or so inch?

John
Reply With Quote
  #4  
Old 12-27-2018, 09:49 AM
jcj54 jcj54 is offline
 
Join Date: Jul 2013
Posts: 44
Default

Normal
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:52 AM.