Go Back   CMP Forums > Marketplace > Parts Wanted
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 01-20-2011, 07:52 PM
richscot richscot is offline
 
Join Date: Oct 2009
Posts: 5
Default 1903A3 Aperture Slide Spring

Thanks to everyone who responded. I found what I was looking for. As a new service rifle shooter, I appreciate the generosity and the help I got from those of you with experience.

Last edited by richscot; 01-21-2011 at 10:43 AM.
Reply With Quote
  #2  
Old 01-20-2011, 09:04 PM
rattler rattler is offline
 
Join Date: Oct 2009
Location: Ohio
Posts: 198
Default

Numrich has them, but they probably are reproductions.

http://www.gunpartscorp.com/catalog/...50&catid=11905
Reply With Quote
  #3  
Old 01-21-2011, 09:53 AM
richscot richscot is offline
 
Join Date: Oct 2009
Posts: 5
Default Thank you

Thanks Rattler! I had looked at Numrich, but I guess I must have
missed it. It's OK that it's a repro, so long as it holds that aperture in place. It's amazing how something so small and inexpensive can be so critical. Thanks again.
Reply With Quote
  #4  
Old 01-21-2011, 10:15 AM
tomky tomky is online now
 
Join Date: Oct 2009
Location: Owensboro, KY
Posts: 327
Default PM sent

I have an extra.
Reply With Quote
  #5  
Old 01-21-2011, 10:42 AM
richscot richscot is offline
 
Join Date: Oct 2009
Posts: 5
Default

Tom: I was not sure if you got my other message, but I was able to locate
slide aperture springs at Numrich. I guess I missed them when I was looking
there before. Thanks for your response. richscot
Reply With Quote
  #6  
Old 01-21-2011, 12:33 PM
hammonje hammonje is offline
 
Join Date: Feb 2010
Location: Union, KY
Posts: 4,526
Default

The ones from Numrich suck. They are super cheap repos. I threw all mine from there in the trash. They have no tension.

Sarco has them and they are either USGI or exact copies. The Numrich ones were different from the USGI ones. I could not tell the difference from the Sarco slide aperture springs and GI ones.

Make sure and degrease the area when you replace it. That will help keep it from sliding around.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -5. The time now is 11:59 AM.