Go Back   CMP Forums > CMP Competitions > CMP Rules
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-2018, 08:02 PM
mac1911 mac1911 is offline
 
Join Date: Oct 2009
Posts: 2,716
Default Rapid stage reload with K31

The rules always say 2 and 8 or 5 and 5

The K31 clips hold 6 rounds and dont work well with 5.
So is it a rule violation to load 4 and then 6 on the reload by clip.

Im not buying another mag and will load by clip
Reply With Quote
  #2  
Old 10-04-2018, 08:15 PM
7.62 Nitro Express 7.62 Nitro Express is offline
 
Join Date: May 2010
Posts: 336
Default

I really don't think anyone would care. For most club level events they are just happy to have you come out and participate. Even when I shot the vintage match at Perry they were not tight about little stuff like that.

If you really want to do 5 and 5 you can glue pieces of appropriate diameter dowel into the front and back paper sections of the stripper clip where the topmost cartridge would go. This will effectively block it from 6 to 5 rounds, take up the slack space and give your thumb a clear path to push the cartridges through and into the magazine.

Last edited by 7.62 Nitro Express; 10-04-2018 at 09:32 PM.
Reply With Quote
  #3  
Old 10-04-2018, 08:51 PM
dnmccoy dnmccoy is offline
 
Join Date: Apr 2011
Location: Ohio
Posts: 3,814
Default

They have repro clips now for much less than the real ones. Its so much easier to load 5 and 5
Reply With Quote
  #4  
Old 10-05-2018, 03:39 AM
Skeet6 Skeet6 is offline
GSM Master Instructor
 
Join Date: Oct 2009
Location: Pocono Mountains
Posts: 1,529
Default

In competition, I simply use a mag from another one of my K31 rifles - but have heard of people gluing a dowel in the speed loader to take up the 6th round position.
Mike B
__________________
CMP GSM Master Instructor
NRA Range Safety Officer
Still searching for WRA 1614856.
Reply With Quote
  #5  
Old 10-06-2018, 12:16 AM
OKC_Jim OKC_Jim is offline
 
Join Date: Sep 2010
Location: OKC, Oklahoma
Posts: 1,038
Default

Quote:
Originally Posted by mac1911 View Post
The K31 clips hold 6 rounds and dont work well with 5.
I've not had any difficulties with loading only 5 in the clips.

But, like somebody else said, I've seen others glue a couple of pieces of appropriately sized dowel into the clip.
Reply With Quote
  #6  
Old 10-08-2018, 09:02 PM
Headspace Headspace is offline
 
Join Date: Oct 2009
Location: Massachusetts
Posts: 362
Default

https://www.keepshooting.com/schmidt...-magazine.html

Get a 2nd mag. Much easier than dealing with the wax stripper clips

David
Reply With Quote
  #7  
Old 10-09-2018, 07:37 AM
Cadence Cadence is offline
 
Join Date: Feb 2013
Location: NW Ohio
Posts: 86
Default

If you purchase any of these, make sure you also get some 2mmx12mm S.S. rollpins to replace the pins that come with the magazine. I bought a 3 extra mags a few years ago to use at the national matches. One of the magazines had the pin come out while on the line and I lost the spring. Luckily I found the mag release arm, so I replaced all pins with the 2mmx12mm pins.
__________________
CMP Member
GSM Master Instructor
NRA Life Member
Appleseed Instructor
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:52 PM.