Go Back   CMP Forums > CMP Competitions > CMP Rules
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Old 03-16-2019, 07:18 AM
mac1911 mac1911 is offline
Join Date: Oct 2009
Posts: 2,846

Originally Posted by mac1911 View Post
It took a little work, cost me nothing but time.
1. Took some weight off the fat barrel ( this barrel is nothing special and seen some rounds especially the cheap stuff)

2. Lost the annoying brake and some barrel--ended up with almost 3" of barrel loss

4. Changed out to a free float tube. Its about a wash for the A2 guards I had on there.
5. Re crown 11' crown I went a little deeper to leave just a slight "ring" (blue) then polished it up

quick test 100 yards benched, lunch time rushed method!
left PPU m193 Right 24 grains varget 69gn Nosler CC.

so if I make it to VT games I should be good to go

I will bring the hack saw and cut that last available inch off if needed!

after that I will SBR tax stamp it!
Reply With Quote
Old 06-18-2019, 08:55 PM
GarandThumb21 GarandThumb21 is offline
Join Date: Feb 2018
Posts: 16

My AR with a WW Government Profile A4 upper came in at 7 lb. 9.7 oz. Two quick fixes:

1. I ordered a lighter pair of handguards from RRA. A pair weighs 8.8 oz., which cut off about 0.7 oz. of weight from the handguards that came installed on the upper.

2. I swapped out the knobs on the carry handle with 10-32 stainless steel lock nuts.

Total weight after these mods: 7 lb. 7.8 oz.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 07:28 PM.