Go Back   CMP Forums > CMP Sales > Ammunition
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-02-2014, 09:34 PM
7 ring 7 ring is offline
Join Date: Oct 2009
Location: Illinois
Posts: 371
Default HXP Reduced Charges

I measured the O.A.L. and the length to ogive on 10 rounds of HXP 1978 that I pulled out of a can of mixed headstamp HXP ball I purchased from CMP. The measurements were .024" difference from long to short. Only 2 rounds measured the same and the rest were all over the board.

I pulled bullets from 32 rounds of HXP 1978 and charge weights in 9 rounds ran from 53.6g to 54.5g with the tenth round having a charge weight of 58.4g.

I thought, why not clean the asphalt out of the case mouths, measure each charge weight and reseat the bullets to increase consistency and maybe gain a little accuracy. I decided to set the charge weight at 45.0g or 84%, which I have done with other surplus ammunition with a great deal of success. The charge filled most the case behind the bullet, so I was not concerned about overpressure due to powder position inside the case.

I fired the 32 rounds yesterday and several of them had delayed ignition. I could hear the distinct sound of the hammer falling as if I was dry firing, then one or two seconds later the powder ignited. This concerned me.

Accuracy was not any better than shooting loose HXP ball with mixed headstamps.

I went back to the range today and fired 69 rounds of HXP with mixed headstamps without any problems.

Use caution if you try to pull bullets and measure charge weights to increase accuracy.
My sight wobble area has it's own zip code.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 01:29 AM.