Go Back   CMP Forums > CMP Sales > CMP Bolt Action Rifles
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #11  
Old 07-08-2020, 03:13 PM
dprice3844444 dprice3844444 is offline
 
Join Date: Apr 2011
Location: se florida 01/sot
Posts: 5,474
Default

try springfield3 for correct parts if needed
Reply With Quote
  #12  
Old 07-10-2020, 04:18 PM
navyrifleman navyrifleman is offline
 
Join Date: Oct 2009
Posts: 733
Default

I have seen plungers that have different shape bearing surfaces. One type has a large rounded end which engages the detents, and the other has a smaller end. If yours is of the smaller type, perhaps the larger type end would fix the problem you are having.

Another thing you might check is the spindle pin itself and how it fits in the receiver and how the cutoff is able to turn on it. If you have no problem with the spindle pin, and no problems with the fit of the cutoff in the receiver, then the plunger would be the likely problem. But eliminate these other possibilities first.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:59 AM.