Go Back   CMP Forums > Welcome Center > How To's
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #21  
Old 12-22-2017, 05:53 AM
Hal O'Peridol Hal O'Peridol is offline
 
Join Date: Oct 2009
Location: Blaine, WA
Posts: 64
Default

Nice work!

I built mine several years ago before the influx of the complete kits. I sourced parts from gunbroker, an internet forum WTS ad and direct from Italy. Receiver came from Garand guy but was not to spec. Legs, while milled out to fit magazine were still Garand shaped and front hole for the magazine clock was still a small hole, not the 8mm needed.



I cut the legs on the receiver to shape using a dremel cutoff wheel and masking tap for a guide. The front mag catch I used a pin and bushing arrangement.




Stock I modified a Garand stock.



Stripper clip guides were not available backthen. Not really going to worry about it now.

Who did the engraving on your receiver? Nice job.

Last edited by Hal O'Peridol; 12-22-2017 at 05:58 AM.
Reply With Quote
  #22  
Old 12-22-2017, 10:32 AM
Old Guard Old Guard is offline
 
Join Date: Apr 2013
Location: tn
Posts: 736
Default

[QUOTE=cal50;1662036]The USGI drill rifle receiver was welded on to demil it. All the ones I have seen have been welded with stainless steel filler rod. This will not conventional take blue or park. You can use Oxynate 84 that works on stainless steel if desired.

I had some left over Norrel SOCOM black Moly Resin that I applied to my receiver. I blasted it lightly and then applied with airbrush and baked it to cure.

My wood was in nice shape and only needed some light dents and dings steamed out and a few coats of tung oil. Beretta used nice walnut.


Now I am ready for a range trip~
very nice work, it is a beautiful package, certainly interested if you catch up and want to do the milling on another early garand reciever..
Reply With Quote
  #23  
Old 12-22-2017, 08:29 PM
Sigpros Sigpros is offline
 
Join Date: Apr 2017
Location: Missouri
Posts: 68
Default

Great thread and nice rifle. I wish I had the skills
Reply With Quote
  #24  
Old 12-23-2017, 01:33 PM
cal50 cal50 is offline
 
Join Date: Mar 2011
Location: Ohio
Posts: 123
Default

There are several variations on the Garand to Beretta BM59 conversion.
It really is a unique rifle.
Reply With Quote
  #25  
Old 12-23-2017, 09:59 PM
s11033 s11033 is offline
 
Join Date: Oct 2013
Location: Boston, MA
Posts: 78
Default

Hey guys,

I bought a couple BM59 receivers made from ADI cast receivers, a couple Sarco BM59E parts kits, and took apart a Shuff's Mini-G that I hadn't shot in a while. I reshuffled the parts and ended up with a BM59E, a Mini-59 and a Mongrel .308 Garand. I'm pretty happy with the results, especially considering that each rifle cost under $800. I'll post some more pictures when I get back home from vacation.

https://imgur.com/a/nagGb

Steve
Reply With Quote
  #26  
Old 12-23-2017, 10:15 PM
Neighbors Neighbors is offline
 
Join Date: Feb 2014
Location: Houston
Posts: 443
Default

Thanks for the detailed series of posts! Love threads like this!

Chris
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:30 PM.