Go Back   CMP Forums > CMP Sales > M1 Carbine
Register FAQ Members List Calendar Mark Forums Read

Closed Thread
 
Thread Tools Display Modes
  #21  
Old 11-05-2017, 09:18 AM
jerryd14 jerryd14 is offline
 
Join Date: Aug 2011
Location: Urbanna, Va.
Posts: 5
Default Butt Out

Then Butt out and go shooting, as you offer nothing but noise.
  #22  
Old 11-05-2017, 09:47 AM
Roadkingtrax Roadkingtrax is offline
 
Join Date: Oct 2009
Location: Arizona
Posts: 8,588
Default

Quote:
Originally Posted by jerryd14 View Post
Then Butt out and go shooting, as you offer nothing but noise.
What's your point with these, less than germane posts?

Has your bore gauge gone through a metrology shop to ensure its dimensions comply with the tool drawing GD&T specs? If not, your gauge is no better or worse than a simple bullet test.
  #23  
Old 11-05-2017, 12:58 PM
The Original Youngblood The Original Youngblood is offline
 
Join Date: May 2010
Location: Virginia, on the west side of my ancestral farm
Posts: 879
Default

Quote:
Help me understand, are you two so knowledgeable that you need to tell us all that what we have to add in helping others is worthless.
Quote:
Try being an adult and use this site to help others and not be a jerk.
Quote:
Then Butt out and go shooting, as you offer nothing but noise.
An interesting approach for a new member to introduce himself to the forum membership ...
__________________
Original Join Date: 25Mar04
  #24  
Old 11-05-2017, 05:05 PM
HB of CJ HB of CJ is offline
 
Join Date: Nov 2011
Location: 42N -123W OR USA Kinda
Posts: 1,230
Default Establishing Bore And Barrel Condition ...

Establishing the bore and barrel condition is fun and easy IF you have the necessary stuff. Even if you do not, lots can be done to consider what you have.

We do the following before buying another USGI M1 Carbine for the family. We shoot the gun. See how it prints. Are the holes round? Are the sights on?

If the little rifle shoots great then most probably a 90% chance of purchase. Close examination MIGHT detect some major safety flaw like cracks.

Scrub out the bore with brushes and solvent then use a cheapo bore light. Look for rings and gross corrosion, pitting and the like. Takes good eyes.

If you have a 12 gage 00 buckshot round, take out one ball and gently force it down the bore. Mike the resulting slugged buckshot. A .308 bore is good.

But some worn out barrels still shoot good. Good groups with good ammo. No key holing. The holes are round. Again shooting the Carbine is best.

If you want to and if you have all the gages and stuff it is fun and easy to do a close exam. We do not have a bore camera snake. Too expensive but nice.

We start by running a series of barrel straightness gages carefully down the muzzle. Easy to get one stuck. We go slow and easy. Is the barrel straight?

Then a throat gage. Easy to use. Then a muzzle wear gage. Again easy to use. All of the measurements are subjective. Not an exact science for us.

Does the piston move freely? No real point of taking the piston nut off. If the Carbine functions 100% then we just leave it alone. The exception is the M2.

That is about it. All fun and easy if you got the gages. Even if you do not still easy to determine bore condition. Shoot. Scrub and slug. Bright bore light.

Works for us shooters. We are not collectors. This is just to establish bore condition. It does NOT address all the other wear and safety checks necessary.

All Oregon State Laws, US Code Laws And NFA Rules Apply.
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -5. The time now is 08:56 AM.