Go Back   CMP Forums > CMP Sales > Accessories
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11-30-2019, 02:20 PM
RHScott RHScott is online now
 
Join Date: Jul 2016
Location: NC
Posts: 197
Default M1905 refinish services

I have a SA 1920 Mfg M1905 16" that really needs restoring. Suggestions on anywhere that offers a parked finish similar to the one it had in 1920?
__________________
You don't need to be perfect, just better than your competition.
Reply With Quote
  #2  
Old 11-30-2019, 02:34 PM
budmant budmant is offline
 
Join Date: Oct 2009
Location: NJ
Posts: 1,653
Default

Shuffls Parkerizing did one for me in manganese & it turned out great!
__________________
45 positive feedbacks before the change
Reply With Quote
  #3  
Old 11-30-2019, 06:07 PM
AFJon AFJon is offline
 
Join Date: Feb 2012
Location: Colorado Springs, CO
Posts: 3,150
Default

Naval Jelly

http://forums.thecmp.org/showthread.php?t=137090
__________________
USAF 1989-2012
295 Missions under Montana, and more trips to Korea and the Middle East than I care to remember.
"To Err is Human, To Forgive is Divine. Neither of Which is SAC Policy."
Reply With Quote
  #4  
Old 12-01-2019, 02:20 PM
krdomingue krdomingue is offline
 
Join Date: Nov 2015
Location: Katy, TX
Posts: 1,105
Default

I am not a fan of restoring beyond rust removal and oiling, but the is a guy in the Facebook group that restores them.

"M1, M1905, M1942, and M1905-E1 Bayonet Collector's Club"
Reply With Quote
  #5  
Old 12-06-2019, 12:11 PM
DougS DougS is offline
 
Join Date: Oct 2009
Location: Michigan
Posts: 432
Default

When did they start Parkerizing the entire blade on the 1905 bayonet? Early on the balde was in the white and only the handle and maybe the first 1/2" of the blade were blued or parked.
Reply With Quote
  #6  
Old 12-16-2019, 09:43 AM
navyrifleman navyrifleman is offline
 
Join Date: Oct 2009
Posts: 579
Default

Normally, I would suggest NOT refinishing an antique original - unless the condition is poor and rust covered. However, it is your call.

Using Naval Jelly will remove rust and all existing Bluing. Follow the directions carefully and do not let it sit on the metal for more than ten minutes. Use several separate applications if necessary.

It will turn the blade a dull yellowed color. This can be followed up by polishing the blade with Chrome polish like Simonize. Polishing will make the blade very bright and shiny. If shiny is what you want, remove any polish residue with a good solvent, such as Ronsonol lighter fluid, followed by a nice coating of gun oil.

If you want to blue the blade, you can use a commercial cold blue after thoroughly degreasing and removing the polish residue, followed by a water wash. When dry, coat with gun oil.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:29 PM.