Go Back   CMP Forums > CMP General > Ask Each Other
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11-11-2018, 12:30 PM
GrampawEd GrampawEd is offline
 
Join Date: Oct 2009
Location: Texas
Posts: 873
Default A tip for those whose reloading room has slowly gotten darker.

For twenty years the four bulbs from the ceiling fan lighted my loading bench very well. It recently dawned on me that these bulbs must be getting weak. I went to Lowe's to see about a remedy. Came home with a four foot long LED fixture to hang from the ceiling. Wow, what a difference. Actually a two footer would be fine but this thing brightens the whole room. It looks like a dungeon in here when I turn it off. $20 well spent.
Reply With Quote
  #2  
Old 11-11-2018, 01:01 PM
Johnho Johnho is offline
 
Join Date: Nov 2009
Location: Volusia County, Florida
Posts: 420
Default

Ha, better get your cataracts removed. Then those lights will be too bright.
Reply With Quote
  #3  
Old 11-11-2018, 01:12 PM
Ronwall Ronwall is online now
 
Join Date: Feb 2017
Location: Ky
Posts: 1,083
Default

When purchasing LED lighting always check the color temperature. The higher the kelvin number the whiter the light. When you get up to 5000K it starts taking on a bluish hue. For a shop light I prefer something in the 4000K range. See below charts.

https://postimg.cc/p5R3KTdg
https://postimg.cc/wtKz79hd
Reply With Quote
  #4  
Old 11-11-2018, 01:40 PM
Doubs43 Doubs43 is offline
 
Join Date: Oct 2011
Location: Byron, GA
Posts: 864
Default

I replaced my 100 watt florescent bulbs (spiral type) with LED bulbs. Instant on and brighter.

The nearest bulb is about 6 feet from my bench and I notice that my electronic scale is more stable now. I have two that are accurate within .02 grains. They used to wander a bit but now are almost rock solid. I think the old florescent bulbs were causing some drift.
Reply With Quote
  #5  
Old 11-11-2018, 03:06 PM
The Original Youngblood The Original Youngblood is offline
 
Join Date: May 2010
Location: Virginia, on the west side of my ancestral farm
Posts: 880
Default

Be aware that LEDs may degrade radio reception.

I have LED fixtures over both my gun & reloading benches (replaced flouro units) and had to relocate my radio. That was a primary reason why I did not replace all of the basement lighting with LED and retained the fluorescent fixtures (for now).
__________________
Original Join Date: 25Mar04
Reply With Quote
  #6  
Old 11-13-2018, 09:05 AM
Ohio Don Ohio Don is offline
 
Join Date: Jan 2014
Location: S Florida and SE Ohio
Posts: 4,119
Default

When I had to replace the bulbs in the kitchen fixtures, I went with 18 watt LEDs. Needless to say, you almost need sunglasses to be in it as there are 8 bulbs in an area of about 240 sq/ft. Like Ronwal's shop lights, these are 4000K bulbs.
__________________
NRA Life member
NRA Certified Pistol Instructor,RSO
US Army Transportation and Medical Corps Museums Life member
Reply With Quote
  #7  
Old 11-13-2018, 11:25 AM
grumpa72 grumpa72 is offline
 
Join Date: Apr 2010
Location: Moon Township, PA
Posts: 2,319
Default

Which Lowes LED light did you get? Single or double fixture? I'm not seeing any four foot LED utility lights for under $35.

grumpa72
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -5. The time now is 03:20 PM.