Go Back   CMP Forums > CMP Competitions > 3-Position Air Rifle
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 03-28-2013, 12:06 PM
Mac Attack Mac Attack is offline
 
Join Date: Jul 2010
Location: Fayetteville, GA
Posts: 802
Default Daisy 853 Disassembly for trigger job?

I would like to try lightening the trigger on my 853 and while it's apart I plan to stain the stock. I was looking at the instructions guide and it does not say how to disassemble the rifle. It looks like it there are 3 screws to remove in order to take the action out of the stock. Is this correct?

Also, when removing the trigger group, are there any tricks to prevent all hell from breaking loose?

Thanks
Reply With Quote
  #2  
Old 03-28-2013, 10:34 PM
aljkw aljkw is offline
 
Join Date: Oct 2010
Location: Cincy, OH
Posts: 508
Default

There are directions out there for performing the trigger job process. They are very good and easy to follow. I will look tomorrow and post the link when I find it. As I recall I just followed the steps for the process and all went well.
There really is not much that an go wrong when taking it apart. Just take your time.
Reply With Quote
  #3  
Old 03-29-2013, 12:49 AM
ac12 ac12 is offline
 
Join Date: May 2012
Posts: 18
Default

This is a post I did on another forum.
The disassembly instructions are in one of the links.

http://www.gatewaytoairguns.org/GTA/...?topic=39648.0
Reply With Quote
  #4  
Old 03-30-2013, 12:21 AM
Mac Attack Mac Attack is offline
 
Join Date: Jul 2010
Location: Fayetteville, GA
Posts: 802
Default

Thanks. I Plan To Work On It Tomorrow.
Reply With Quote
  #5  
Old 04-17-2013, 06:26 PM
Mac Attack Mac Attack is offline
 
Join Date: Jul 2010
Location: Fayetteville, GA
Posts: 802
Default

FaIlure. My Trigger Job Was Going Great Until I Got To The Trigger Modification. I Decided To Use My Angle Cutters To Snip The Excess Off And Ended Up Cracking The arm And It Snapped Off. So Now I Need To Make The Call To Daisy And Order A New Trigger And Might A Well Order A Better Front And Rear Sights . I Figure I Wil just Order All The Necessary Parts In The Event My Original Work Doesnt Turn Out. Just Sucks Too Because I Really Looking Forward To ShootIng it This Weekend.
Reply With Quote
  #6  
Old 04-17-2013, 10:13 PM
ac12 ac12 is offline
 
Join Date: May 2012
Posts: 18
Default

Bummer.
I use a razor saw that I got from the hobby shop to cut the plastic.
If you get the 888 parts, they will already be shaped for you, so you don't need to cut the plastic pieces.
Reply With Quote
  #7  
Old 05-04-2013, 08:01 PM
Mac Attack Mac Attack is offline
 
Join Date: Jul 2010
Location: Fayetteville, GA
Posts: 802
Default Help!!!!!!!

Okay, I finished my trigger job modification and had a couple of white plastic spacers left that I did not see where they came from when I disassembled my rifle. I looked online and found that it is called a 'barrel' seal' and one goes between the barrel and the bump body. there is no reference to a second barrel seal or it's location but I have a spare one.

Anyone know where the second seal goes?
Reply With Quote
  #8  
Old 05-04-2013, 08:31 PM
ac12 ac12 is offline
 
Join Date: May 2012
Posts: 18
Default

I think my 853 only had 1 of them.
Perhaps the 2nd one is a spare, or whoever did it before you used 2 of the spacers.
Reply With Quote
  #9  
Old 05-11-2013, 04:31 PM
Mac Attack Mac Attack is offline
 
Join Date: Jul 2010
Location: Fayetteville, GA
Posts: 802
Default

I finished my modifications and pictures can be found in the following link:

http://forums.thecmp.org/showthread.php?t=107763
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:12 AM.