Go Back   CMP Forums > Welcome Center > How To's
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #61  
Old 04-29-2018, 01:27 PM
ZvenoMan ZvenoMan is offline
 
Join Date: May 2011
Location: AL
Posts: 3,045
Default

Here are the stocks I selected for today.

[img]https://farm1.staticflickr.com/955/41783002191_7a63601f4c_c.jpg[/img







Of course, when I took the last photo I noticed a crack on the porch of the bottom stock. Looks like a splice; I pulled it for inspection, it is pretty dry and may need some glue. I selected a pretty beat up stock as today's victim.

]







I'll take a pic of the label later. 10% +/- of the stocks have a label, a 7-digit number stamped, or both in the channel. Most have the same number stamped on the butt somewhere (varies). I saw one with a 3/4" oval number plate on the butt, and a few with evidence of something once on the bottom of the pistol grip.

JH
There are some very attractive pieces of wood, and some nice birch as well.
Reply With Quote
  #62  
Old 04-29-2018, 02:00 PM
ZvenoMan ZvenoMan is offline
 
Join Date: May 2011
Location: AL
Posts: 3,045
Default

About done for today.

Closeup of the label. Most have the number stamped on the outside of the stock written here. Looks like come-ups are here.


After the scrubbed-in oil sat for about an hour I wiped the stocks dry with this. While much crud came off into the scotchbrite this shows what else came off. I'll repeat a few times until this looks cleaner.


Here they are after the wipedown. I'll scrub in another coat or two this afternoon.


JH
Reply With Quote
  #63  
Old 04-29-2018, 03:57 PM
ZvenoMan ZvenoMan is offline
 
Join Date: May 2011
Location: AL
Posts: 3,045
Default

Done for the day.





2 sessions of scrub-sit-wipe. Smoothed out roughness, wood isn't as dry, and much cleaner.
See below, 2nd wipedown took off less crud.
I have wiped dry; I'll let sit and wipe dry once more before going to bed.



US Stock:
I couldn't find a cartouche.




Foreign stock:


Happy weekend
JH
Reply With Quote
  #64  
Old 05-06-2018, 06:05 PM
ZvenoMan ZvenoMan is offline
 
Join Date: May 2011
Location: AL
Posts: 3,045
Default

I spent some quality time with some stocks today.
I grabbed a few (10-12) and decided to clean this batch to the wood. I sprayed with some water based cleaner (I used a bottle of awesome from $Tree, then refilled with 50% Purple Power and H2O; both work great). I let them soak for 30 min or so then scrubbed with an old scotchbrite sponge. I rinsed with hot water while scrubbing more, then let dry. Much as I want to get out the oil I'll let dry another day or so before considering any finish. Found some cracks and other fun.

This group: Top one is solid but has some varnish that hasn't come off. I'll need something stronger. Denatured Alcohol did nothing so not shellac. I'll strip it later this week.
Middle is the worst crack I found; it's straight through the left side magwell. Tight fit, easy fix, and the wood looks nice.
Bottom one is the one found last week. Looks like a splice was made before it was milled into a stock, top left under the receiver. Solid; I'll inspect the join and work some glue in the cracks before continuing.






This group looks good.
Top one has plugged grenade sight holes and a spliced piece above and to the right of the plugs. Also a heel splice. Also 3 spliced saw cuts just forward of the magwell.
Middle is solid, remanants of a cartouche.
Bottom is a replacement (foreign?) heavy dense wood. These had a nice coat of grease.




Top two below are solid well used stocks. Bottom one has unplugged grenade sight tools, a nice crack above and to the right, and a nice looking cartouche.






Worst group below. Top one is a heavy replacement, bottom left at buttplate is a fault in the wood. Should be easy to fix with sawdust and epoxy.
Middle one had a grenade sight and buttplate, I removed them for cleaning. Ruined because some jackwagon stamped "4400" in the barrel channel! Solid but well worn.RA-P on the bottom of the pistol grip.
Bottom is solid, I'll have to use paint to get rid of the distracting stripes.





Last edited by ZvenoMan; 05-06-2018 at 06:09 PM.
Reply With Quote
  #65  
Old 05-12-2018, 12:51 PM
ZvenoMan ZvenoMan is offline
 
Join Date: May 2011
Location: AL
Posts: 3,045
Default Dishwasher test

I have read on forums (so it has to be true?) that a dishwasher is a good tool to clean stocks.
Since Zvenowife is thankfully a "thing" of the past I decided to test it out; she didn't take the dishwasher (surprisingly).
I selected 3 random stocks that looked typical of the group. Some had Proof-P's but I couldn't find any other useful features (other than the fine checkering).
I removed the top rack and crossed the 3 stocks inside, no issues fitting them. I used Reva liquid detergent (Aldi), full amount. I ran through 1 cycle, set at: Heavy wash, High Temp Wash and NO for Heated Dry. I removed after the wash was complete. I see nothing left in the dishwasher, so you married guys may be safe; run a cycle and put some lemon something in to be safe. No warranty implied.
Here are the results, judge for yourself.
I will try a new format; a before and after picture for each shot.

Before


After


Before


After


Before


Another before


After


The stocks felt "gritty" and did not seem to be as clean as my regular water-based degreaser cleaning. So another test:
I rubbed a paper towel on one from the dishwasher; it has dried for 4-5 days, otherwise nothing done.


I did the same thing (except rubbed longer) on one previously cleaned using 1 session of Purple Power and scrubbing sponge:


Here is another comparison. The middle stock in the photos has some good detail I will use 1024 pixels wide; sorry for the mobile viewers.
BC (before cleaning) is top, AD (After Dishwasher) is bottom. Yeah, I saw that.






My conclusion:
1. This is not a replacement for hand cleaning. These will need to have a scrub session with purple power.
2. This did not destroy the dishwasher (I DID NOT try the foreign made stocks I received, they have a coating of grease. I'm not that stupid.).
3. This did not remove the cartouches.
4. This did raise some of the dents and dings.

Your results will vary, based on detergent, temp of dishwasher, etc. Original condition is always the key, garbage in, less smelly garbage out. The internet told me not to use the heated dry (and that makes sense). When I took them out, immediately after the wash ended they were wet, not dripping, and dried overnight fine. I would wait a few days before working on them, no different from my regular scrub. So I see no need to risk the heated dry, but that may steam out some more dents? I'll probably try one to see, someday.
For what it's worth I have only tried to steam dents with an iron once and wasn't impressed. I may try it again with one of these. Stocks with character are to my liking.

JH

Last edited by ZvenoMan; 05-12-2018 at 12:55 PM.
Reply With Quote
  #66  
Old 05-13-2018, 10:00 PM
RoadWins RoadWins is offline
 
Join Date: Feb 2016
Location: Pineville La.
Posts: 226
Default

ZvenoMan
Ran 4 random stocks thru my "Stock Only" dishwasher. Presprayed with Purple Power. Plus about a cup of Purple Power in the water. Also Finish dishwashing tablet. None of these have any cartouches. Will take some closeup pics next time. I have tried with and without heated dry. I have found heated dry removes more of the dents and dings. Plan to run most of the greasy orange stocks also.

4 Random no cartouche stocks


Little Purple Power spray


After Wash


All Done
__________________
RoadWins
Looking For SA #2465125 #3740941 S&W #AHD6840
Semi-Retired LEO
NRA Life Member
Reply With Quote
  #67  
Old 05-13-2018, 10:49 PM
Polock Polock is offline
 
Join Date: Oct 2009
Posts: 92
Default

ZenoMan&RoadWins---Great info/pics. Have been curious about the "dishwasher" idea.
It is very helpful to see actual results.

Wish I had a "stock only" dishwasher--Looks like the PP and dishwasher combo
works great--
__________________
"I have never seen a situation so desperate that the arrival of a policeman did not make worse"--Brendan Behan, Irish poet.

Last edited by Polock; 05-17-2018 at 12:03 PM. Reason: sp.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:19 AM.