Go Back   CMP Forums > Marketplace > Junior Shooting Rifles/Equipment
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-22-2018, 08:27 PM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default Remington 513T bolt comes out when ejecting round

My Remington 513T bolt comes out of the receiver every time a cartridge is ejected. Everything else works fine. This rifle is new to me and I have hopes that my club can use it for Junior Members who cannot tolerate the M1 Garand rifle. If I cannot get this to work properly I will sell as my Club, Military Arms needs a working small bore rifle.
__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)

Last edited by hd89044; 05-22-2018 at 08:36 PM. Reason: added more info.
Reply With Quote
  #2  
Old 05-22-2018, 09:47 PM
BRMPCF50 BRMPCF50 is offline
 
Join Date: Dec 2013
Location: Central MO
Posts: 64
Default

Are you releasing the trigger before operating the bolt? The 513T bolt is removed by holding the trigger back while pulling the bolt back.
Reply With Quote
  #3  
Old 05-22-2018, 11:12 PM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default

No. Trigger is released before working the action. Pressing the trigger will allow the bolt to be inserted back into the action. Frustrating.
__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)
Reply With Quote
  #4  
Old 05-22-2018, 11:34 PM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default Remington 513T

__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)
Reply With Quote
  #5  
Old 05-22-2018, 11:45 PM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default

__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)
Reply With Quote
  #6  
Old 05-23-2018, 12:25 AM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default

I have seen a post that says that the problem is with the sear. Probably someone has messed with it. I ordered a complete trigger/sear assembly. I hope I can reinstall properly.
__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)
Reply With Quote
  #7  
Old 06-02-2018, 08:07 PM
hd89044 hd89044 is offline
 
Join Date: Mar 2010
Location: Davis, CA
Posts: 15
Default

I've purchased a complete trigger/sear assembly from SARCO. I need to figure out how to remove & install the new one. It was not expensive (about $30). It just came in the mail today. If anyone as a link to where I can find instructions about disassembly/reassembly, I would be appreciative. What I have been told is the reason the Remington 513T comes out of the receiver is due to a faulty sear. I will update this thread when i figure out the next move.
__________________
John Murphy
Retired US Army Officer
Military Police Corp (CID)
Reply With Quote
  #8  
Old 06-03-2018, 11:36 AM
BRMPCF50 BRMPCF50 is offline
 
Join Date: Dec 2013
Location: Central MO
Posts: 64
Default

I have a Remington Service Manual for the 513T circa 1963. (Seven pages of text (!).)

Also have US Army Technical Manual TM 9-1005-206-14P/4, Operator, Organizational And Field Maintenance Repair Parts and Equipment for Commercial Rifles

Neither is especially helpful. Combined they might be of some help. The Remington SM is mostly text, the USA TM is lists of parts and drawings. The TM has a great exploded view of the receiver and trigger group.

I'd be happy to send you a .pdf of the Remington Service Manual. The TM you should be able to find on line, but I should also send you a pdf of the two pages covering the trigger group.

From the Remington SM:

Trigger Cushion Spring (Part 491)
Unscrew the trigger cushion spring screw and remove the trigger cushion spring assembly

Trigger Cushion Spring Housing (Part 124)
Loosen trigger cushion spring housing lock nut and unscrew the trigger cushion spring assembly from the receiver.
Unscrew trigger cushion spring retaining screw and remove trigger cushion spring and trigger cushion spring plunger from trigger cushion spring housing.

Safety
Unscrew safety screw located on the right side of the receiver and lift off safety lever.
Push safety into receiver from hole in right side of receiver and remove through rear of receiver.

Ejector
Remove ejector screw from left side of receiver.
Remove sear pivot screw from left side of receiver, directly back od ejector screw.
Slide receiver insert, rear forward in receiver and remove ejector.

Trigger Assembly
Drive out trigger pin.
Push trigger assembly upward in receiver, feeding sear downward from receiver into magazine opening directly forward of trigger opening.
Grasp sear and pull trigger assembly from magazine opening.

Trigger Spg. Plunger
Remove trigger spring plunger and trigger spring from hole in top of trigger.

Magazine Lock
Unscrew magazine lock screws from bottom of receiver insert, and remove magazine lock.

Receiver insert, rear
Slide insert from receiver through rear end.

[Reassembly is not quite the reverse. The Remington SM has some tips and techniques. I'll be happy to send you a pdf. But disassembly will get you started...]
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:23 PM.