Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11-04-2019, 09:23 AM
dpl_hcm dpl_hcm is offline
 
Join Date: Dec 2010
Location: BERRYVILLE,VA
Posts: 683
Default hra 4.66

my 4.66 mil I bought just got to my ffl and its has a das stamp on the stock. would that be correct for a 4.66?
Reply With Quote
  #2  
Old 11-04-2019, 09:39 AM
Kradschutz Kradschutz is offline
 
Join Date: Oct 2009
Location: Ohio
Posts: 998
Default

I think earlier ordnance wheel stock?
Reply With Quote
  #3  
Old 11-04-2019, 09:42 AM
Shomway Shomway is online now
 
Join Date: Apr 2012
Location: Michigan
Posts: 6,195
Send a message via AIM to Shomway
Default

What size is the DAS....3/8" or 1/2"?
__________________
31- 100% ITrader feedback prior to removal.
Feedback....http://forums.thecmp.org/showthread.php?t=209950
Reply With Quote
  #4  
Old 11-04-2019, 09:55 AM
dpl_hcm dpl_hcm is offline
 
Join Date: Dec 2010
Location: BERRYVILLE,VA
Posts: 683
Default

3/8
Reply With Quote
  #5  
Old 11-04-2019, 10:55 AM
Nodak71 Nodak71 is offline
 
Join Date: Jan 2014
Location: North Dakota
Posts: 1,230
Default

According to the research the Ord. wheel stock was only used from 4,660,001 to 4,661,000. That is only the first 1000 HRAs. Without knowing what your serial is other than 4.66 it is hard to say. I would expect some overlap between the wheel and the 3/8 inch DAS. So no way to know for sure without more of the serial. This info is from Canfield's book but think he basically took much of Duff's research on parts altho Rick B. has written some of the stock info for Canfield so is fairly current.
__________________
NRA Life Member
GCA
CMP Customer Since 98

Feedback Thread
http://forums.thecmp.org/showthread.php?t=167261
Reply With Quote
  #6  
Old 11-04-2019, 11:01 AM
Rolling Thunder Rolling Thunder is offline
 
Join Date: Oct 2009
Location: NJ
Posts: 967
Default

Quote:
Originally Posted by Nodak71 View Post
According to the research the Ord. wheel stock was only used from 4,660,001 to 4,661,000. That is only the first 1000 HRAs. Without knowing what your serial is other than 4.66 it is hard to say. I would expect some overlap between the wheel and the 3/8 inch DAS. So no way to know for sure without more of the serial. This info is from Canfield's book but think he basically took much of Duff's research on parts altho Rick B. has written some of the stock info for Canfield so is fairly current.
The Ordnance wheel stocks on these early HRA's goes well into the 4663ooo ranges.
__________________

Reply With Quote
  #7  
Old 11-04-2019, 11:02 AM
dpl_hcm dpl_hcm is offline
 
Join Date: Dec 2010
Location: BERRYVILLE,VA
Posts: 683
Default

46670**
Reply With Quote
  #8  
Old 11-04-2019, 11:11 AM
Nodak71 Nodak71 is offline
 
Join Date: Jan 2014
Location: North Dakota
Posts: 1,230
Default

Quote:
Originally Posted by Rolling Thunder View Post
The Ordnance wheel stocks on these early HRA's goes well into the 4663ooo ranges.
Ok thanks, so that is something else that isn't exactly right in Canfield. I know I found much of the info he shows on early SA parts is wrong too.

EDIT: I just dug out Duff's article from the Fall 2001 Journal. He shows the wheel going to "approximately" 4,664,xxx. Guess I should have looked at that first.
__________________
NRA Life Member
GCA
CMP Customer Since 98

Feedback Thread
http://forums.thecmp.org/showthread.php?t=167261

Last edited by Nodak71; 11-04-2019 at 11:18 AM. Reason: Add info
Reply With Quote
  #9  
Old 11-04-2019, 02:44 PM
GMCASSIDY GMCASSIDY is offline
 
Join Date: Oct 2009
Location: Dallas, Texas
Posts: 450
Default

I have 4663771 with the "ordnance wheel" stamp....

Also has cut -9 op-rod, Hart trigger housing, -9 SA Hammer, D prefix bolt, etc.
__________________
Regards,
George in Dallas

Last edited by GMCASSIDY; 11-04-2019 at 02:48 PM.
Reply With Quote
  #10  
Old 11-04-2019, 09:21 PM
Blurry Blurry is offline
 
Join Date: Jan 2015
Location: Front Royal, VIRGINIA
Posts: 349
Default Hra

I am currently the caretaker of a 466. Perhaps if you’d like we could get the two of them together sometime and compare notes? I saw another early one this past week’s end at the VGCA show at PW Fairgrounds. Neat rifle that as well. They are my favorites.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:52 PM.