Go Back   CMP Forums > CMP General > CMP South Store
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-04-2019, 11:39 AM
col b col b is offline
Join Date: Feb 2010
Location: Huntsville, AL
Posts: 3,192
Default The South Store Drill Saga

Went with my neighbor to the South Store to pick up a drill for a BM59 project. Got it home and took it apart to find that someone had attempted to grind the barrel from the receiver with a disk grinder without removing the gas port or handguards. OK, not a real big deal, then noticed a burn inside the receiver and it had obviously had a weld in the oprod channel, which would have been a no go for me, as it will never park correctly. So, bottom line. Wasted $400 on a drill that had been returned very damaged to the CMP. Didn't realize that could happen and CMP would just put it in the rack without inspection. So, the serial number is SA 3565635. So, you know who you are, and now so does the CMP. Inspect you drill rifles very carefully prior to walking out the door.....don't assume that the CMP has.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

All times are GMT -5. The time now is 08:00 PM.