Go Back   CMP Forums > CMP Competitions > Leg Matches
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 10-24-2011, 12:01 PM
milprileb milprileb is offline
 
Join Date: Oct 2009
Location: Stafford, Virginia
Posts: 2,440
Send a message via AIM to milprileb
Default M1, 1000 yds: some help please

There is a 1000 yd match coming up at Quantico. I would like to try my M1 in that match. Any idea how many clicks of elevation I am going to have to dial up on that rear sight for this. I am up 12 clicks for 200 yds for SR target: 6 o'clock hold with POI at Ten ring from a rest.

Its a CMP match so I assume that target can be seen without a scope??

No, not trying to light the world afire but I am trying to see how well I can do at that distance if the M1 has the legs for it.

Any help would be very much appreciated
Reply With Quote
  #2  
Old 10-24-2011, 12:07 PM
warbird warbird is offline
 
Join Date: Jul 2010
Location: Swampeast Missouri
Posts: 1,469
Default

You can see the target and all of those to your left and right. I personally have a hard time reading my number board without a scope. The scoring disc and spotter are 6 inches. I can't see those at all at 1000yds without a scope.

Last edited by warbird; 10-24-2011 at 12:16 PM.
Reply With Quote
  #3  
Old 10-24-2011, 12:55 PM
Dave Stitz Dave Stitz is offline
 
Join Date: Oct 2009
Location: Doylestown, PA.
Posts: 507
Default

You can use a ballistics calculator such as
http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi

But you will also need to know what bullet you ar using and the velocity at a given point.
Reply With Quote
  #4  
Old 10-24-2011, 01:01 PM
Dave Stitz Dave Stitz is offline
 
Join Date: Oct 2009
Location: Doylestown, PA.
Posts: 507
Default

I plugged in a 175 gr smk and 2600 fps. I think each click on an M1 is 1 MOA? If so, you need to come up 38 more clicks(or 38 MOA) for 1000 yds.
Dave

Edit: Keep in mind you want stay super sonic to target and this drops below super sonic at 1100 yds.

Last edited by Dave Stitz; 10-24-2011 at 01:03 PM.
Reply With Quote
  #5  
Old 10-24-2011, 01:53 PM
milprileb milprileb is offline
 
Join Date: Oct 2009
Location: Stafford, Virginia
Posts: 2,440
Send a message via AIM to milprileb
Default

Dave, you are light years ahead of me as I am just wandering into this type of match. I have LC 69 ball from CMP. I assume that is 150 grains and unk. velocity.

I may not be able sort this out without a practice session and have postpone going to that match till then.
Reply With Quote
  #6  
Old 10-24-2011, 01:58 PM
CDRT CDRT is offline
 
Join Date: Oct 2009
Location: Texas Panhandle
Posts: 1,806
Default

The first time I shot 1,000 yards, one the shooters told me to start at 20 more clicks that I had on at 600 yards. I ended up going 22 more than the 600 yard elevation...if that helps any. You do get sighters, so that will help.
__________________
Navy Vet, Distinguished Pistol, TSRA Conventional Pistol Match Director
Reply With Quote
  #7  
Old 10-24-2011, 02:05 PM
tjtorborg tjtorborg is offline
 
Join Date: May 2010
Location: Blaine, Minnesota
Posts: 1,778
Default

When I shot my Garand at 1,000 or my M1a for that matter I have a hard time getting a good check weld because the rear sight is so high. Its almost like shooting a chin gun. I plan on setting up a 1000 gun with the front sight ground down so I don't need so many clicks on the rear sight. Bu that project is low on the list right now.

Tom
Reply With Quote
  #8  
Old 10-24-2011, 02:55 PM
thaifighter thaifighter is offline
 
Join Date: Mar 2011
Location: Sanford, North Carolina
Posts: 125
Default

I'm glad you posted this. I had been wondering about the Hornady match out to 1000, but never thought about it when I was at my computer.

Here is a link that gives you the basic info out to 1000.

http://www.hornady.com/images/sell_s...match_ammo.pdf

I shot this ammo at the eastern games and I'm very pleased with it's performance. It's very accurate and very repeatable. You can get it from the CMP store, Midway and Cheaper Than Dirt.

According to their lit. The round is still supersonic at 1000 and shows 336.9" of drop between a 200 yard zero and 100. That's a ~34 click correction. If you are holding six o'clock at 200 on an SR at 10 ring POI (assuming the bottom of the ring) Then you are about 3 clicks high for POA=POI. I would factor that into my comeups and shoot POA to center of target at 1000 and see where you are on the paper. If your POI=POA there you can correct back to a 6 o'clock hold with 2 more clicks up (20" on a 44" bull at 1000) and hold the bottom of the black.

HTH and good luck with your shoot!


http://www.cheaperthandirt.com/2H81170-1.html

http://www.midwayusa.com/Product/116...-max-boat-tail
Reply With Quote
  #9  
Old 10-24-2011, 03:09 PM
milprileb milprileb is offline
 
Join Date: Oct 2009
Location: Stafford, Virginia
Posts: 2,440
Send a message via AIM to milprileb
Default

Gents,

I won't have access to a range before the match except for a 100 yd range and I think what you are telling me is I am wasting my time thinking I can factor X amount of clicks on data for 100 and be printing on target at 1000 and I also take it that since I had intended to shoot LC 69 ball, that I got more problems entering this since I don't have a mega powered custom load developed for 1000 yds.

I sure would like to shoot 1000 but I am being swayed now to back down and work up to this longer range after more range time. I don't want to go
out there and not have a chance of hitting paper and just fly rounds thru the
airspace over Quantico for nor results. I am good with marginal performance as this is not a NM Garand nor shooting match grade ammo , but I am not keen on shooting and having blank results.

I may be leaping ahead of myself trying to get into this 1000 yd match opportunity next week.
Reply With Quote
  #10  
Old 10-24-2011, 04:42 PM
BobN54 BobN54 is offline
 
Join Date: Oct 2009
Posts: 529
Default

Quote:
Originally Posted by milprileb View Post
Gents,

I won't have access to a range before the match except for a 100 yd range and I think what you are telling me is I am wasting my time thinking I can factor X amount of clicks on data for 100 and be printing on target at 1000 and I also take it that since I had intended to shoot LC 69 ball, that I got more problems entering this since I don't have a mega powered custom load developed for 1000 yds.
Too much drama Go shoot the dang match and have fun! I like thaifighter's advice - the Hornady is definitely worth a try. Order that Hornady 168 gr. Garand match ammo from Midway and you'll have it in plenty of time. Use Thai's numbers and see what happens. Go in thinking of it as an opportunity to have fun, learn, meet people, and see a lot of cool rifles - you'll be fine.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:04 PM.