Go Back   CMP Forums > Welcome Center > How To's
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-20-2017, 07:20 PM
dukesoprano dukesoprano is offline
Join Date: Aug 2016
Posts: 16
Default How I fixed the M1 Carbine recoil plate screw hole

I traded for this 1942 Inland a while ago and the stock was shot so I purchased this one, no cracks but needed a little work around the recoil plate screw hole. You can see there was some wood missing, this was also one of the problems with the stock I replaced.

Step 1. drill the upper part of the hole to 15/64

Step 2. Insert empty .22 shell

Step 3. JB Weld, not the fast stuff either

Step 4. lay saran wrap over the JB Weld and insert the recoil plate, wait 24 hours

Step 5. Using a dremel I smoothed out the JB weld, then drilled a pilot hole in the .22 case

Step 6. Open the hole up

Step 7. Reassemble M1

Step 8. Take gun to range

Step 9. Aim at 100 yard target

Step 10. Hit the bullseye with the second shot!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 09:21 PM.