Go Back   CMP Forums > CMP Sales > CMP Bolt Action Rifles
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 07-01-2018, 10:47 PM
AceMan AceMan is offline
 
Join Date: Jun 2015
Location: Gulf Breeze, FL
Posts: 44
Default 1903A4 clone

I have a extra Remington 1903a3 I was thinking about making it into a 1903a4 clone. Anybody got any suggestions of a company that could do this for me? I donít have time to do it myself and canít afford a real one. I have read some people use a drill rifle to make a 1903a4...thoughts??
Reply With Quote
  #2  
Old 07-02-2018, 12:32 AM
bruce bruce is offline
 
Join Date: Nov 2009
Location: Georgia
Posts: 938
Default

Call Chuck in Denver. Excellent work. Sincerely. bruce.
__________________
<><
Reply With Quote
  #3  
Old 07-02-2018, 01:24 AM
lemmonhead lemmonhead is offline
 
Join Date: May 2010
Location: Las Vegas, NV
Posts: 218
Default

What is your budget?
Does your rifle have a good barrel?
Is it in original military configuration or has it already been sporterized?
The drill rifles are great for building 1903A4 clones because the receivers have already been altered and drilling and tapping will only enhance the value. I never condone drilling and tapping a non sporterized rifle or receiver. My opinion; if you are going to build a rifle don't screw on a used/worn barrel. Get a new barrel. Either NOS, WOA or Criterion.

Breaking down the cost of building a 1903A4 clone on somewhat of a budget. Also assuming the rifle has all the stock metal. Some parts may be found a little cheaper but you would have to be patient and look hard.

Drill rifle/receiver $100-200
Criterion barrel or NOS barrel ~200-$220 shipped
A good turned down bolt ~ $135-200
A good scant or C stock ~ $180-220
Weaver K 2.5 scope ~ $80-100
Rings ~ $20-50
Scope base ~ $30
Small parts ~$25-30

Totals for parts ~ $770-1050

Average gunsmithing costs for basic work. Add shipping costs.
Install barrel and headspace $100
D&T holes $75
Parkerizing ~$150-200
Extra for fitting and inletting of stock.

I also recommend Chuck. There are fewer and fewer gunsmiths that truly know how to work on these rifles and do the job correct. Chuck might not be the cheapest but he is certainly not the most expensive and the work will be done right. There are 03A4 clones for sale frequently in the marketplace for good prices, you can always keep an eye on the market place or put out a WTB and might end up costing less than building from scratch.

Last edited by lemmonhead; 07-02-2018 at 02:38 AM.
Reply With Quote
  #4  
Old 07-02-2018, 02:07 AM
Col. Colt Col. Colt is offline
 
Join Date: Oct 2013
Posts: 287
Default

Go with a Drill Rifle, get a new barrel and let Chuck in Denver do it. He can give you a better idea - or may even have the parts to put it together.
You can always sell the extra 03A3 to help finance your 03AForgery!
CC
Reply With Quote
  #5  
Old 07-02-2018, 05:02 PM
amadeus76 amadeus76 is offline
 
Join Date: Apr 2014
Posts: 87
Default

I thought Chuck didn't work on drill receivers?
Reply With Quote
  #6  
Old 07-02-2018, 05:43 PM
chuckindenver chuckindenver is offline
 
Join Date: Jan 2012
Posts: 2,592
Default

i work on Drill rifle actions,
just the rifles i build and sell aren't recovered drill rifles.
i wont drill and tap a SC... just too darn hard
Reply With Quote
  #7  
Old 07-02-2018, 07:47 PM
grumpa72 grumpa72 is online now
 
Join Date: Apr 2010
Location: Moon Township, PA
Posts: 2,125
Default

Two cents worth - CID did my 1903Aforgery and I love it! I certainly am biased but if I ever needed/wanted another one he would get my business.
Reply With Quote
  #8  
Old 07-02-2018, 09:24 PM
AceMan AceMan is offline
 
Join Date: Jun 2015
Location: Gulf Breeze, FL
Posts: 44
Default

Great feedback everyone. Based on feedback I should go the drill route. Dang I should have gotten one at the cmp about a year ago when I got my 2 1903a3ís. Yes my 1903a3s are original configuration from CMP. Both are in really nice condition..not sporterized or drilled. I see chuck posted on here so I will look for a rifle then give him a shout. Thx
Reply With Quote
  #9  
Old 07-03-2018, 08:29 AM
smag smag is offline
 
Join Date: Oct 2011
Location: Clarksville, TN
Posts: 151
Default

I know a guy that makes great bolts for your project. Made like the originals were. Not cut and welded back on. No heat on cocking ramp.

Here's one I just did for Art K

https://i.imgur.com/wW4kSC2.jpg
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:57 AM.