Go Back   CMP Forums > CMP Sales > M1 Carbine
Register FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-12-2017, 10:03 PM
AdamF AdamF is offline
 
Join Date: Dec 2016
Location: Massachusetts
Posts: 75
Default M1 Carbine sling and oiler too tight for installation

I did some research and I'm still stumped. I have an M1 Carbine with a USGI stock (appears to be of the potbelly variety). I have a USGI oiler and USGI sling with what I think are D tabs.

I've watched every sling installation video and I still can't get it on there. The well where the oiler sits is too small for the oiler and two pieces of strap that needs to pass through. I first thread the sling from left to right, then drop in the oiler (even at this point it's tight), and then bring the sling around the oiler and can't get it to pass back through the stock from right to left. I've also tried looping the sling around the oiler first and then pushing everything into place with no luck there either.

I don't want to start sanding down parts of the stock. Any advice?

Thanks.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -5. The time now is 12:47 PM.