Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 12-05-2019, 09:41 PM
Gmercury2000 Gmercury2000 is online now
 
Join Date: Oct 2019
Location: Maryland
Posts: 34
Default Flush nut detent question

I'm looking to know if the detent for the flush nut / Type1 LB is the same as the detent for the Type 2 & 3 LB? I know the pinion is larger on the later but don't have mine in front of me at the moment to check. I need to find a replacement for a flush nut. I recently got a flush nut and the detent is damaged where the flat part is that sits on the pinion.

Thanks!
Reply With Quote
  #2  
Old 12-06-2019, 01:17 PM
M1Garandy M1Garandy is offline
 
Join Date: Dec 2011
Location: IL
Posts: 940
Default

I believe the detents are the same.

I've also successfully fixed a couple of detents that would not slide onto the pinion shaft due to dents and damage to the detent. I'm not sure how bad yours is damaged, but perhaps saving the original is an option?
Reply With Quote
  #3  
Old 12-06-2019, 01:40 PM
Gmercury2000 Gmercury2000 is online now
 
Join Date: Oct 2019
Location: Maryland
Posts: 34
Default

Quote:
Originally Posted by M1Garandy View Post
I believe the detents are the same.

I've also successfully fixed a couple of detents that would not slide onto the pinion shaft due to dents and damage to the detent. I'm not sure how bad yours is damaged, but perhaps saving the original is an option?
Thanks, unfortunately the detent is beyond any repair. The flat spot is somehow completely broken away. I'll try and post a picture.
Reply With Quote
  #4  
Old 12-06-2019, 02:42 PM
Nodak71 Nodak71 is offline
 
Join Date: Jan 2014
Location: North Dakota
Posts: 1,285
Default

The Ammo Garand site does have a repro of this part if that helps any.
__________________
NRA Life Member
GCA
CMP Customer Since 98

Feedback Thread
http://forums.thecmp.org/showthread.php?t=167261
Reply With Quote
  #5  
Old 12-06-2019, 03:04 PM
Gmercury2000 Gmercury2000 is online now
 
Join Date: Oct 2019
Location: Maryland
Posts: 34
Default

Quote:
Originally Posted by Nodak71 View Post
The Ammo Garand site does have a repro of this part if that helps any.
I did see them, was curious if they were the same for both. Thanks!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:11 AM.