Go Back   CMP Forums > CMP Competitions > 3-Position Air Rifle
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2011, 11:23 AM
jnespappa jnespappa is offline
 
Join Date: Jul 2011
Location: Lafayette, LA
Posts: 14
Default Used Daisy 853 rifles. WOW!

I was planning to buy a new Daisy/Avanti 853 for around $290 so that my son and I could practice marksmanship in the back yard. Then I noticed the CMP used air rifle program with the same rifle reconditioned for $100. SO, I decided to buy 3 (basically the same price) and donate two to my son's NJROTC program.

They arrived well packed in eggshell foam with new slings, two butt spacers, new sight inserts and apparently NIB rear sights. The stocks had been belt sanded and rubbed with medium/dark oil.


I held them in amazement as bits of history that someone at the CMP had lovingly restored and put out into circulation for further use. I am honored to have received them.

I started out to refinish the one that I was going to keep and to my surprise, I found the grain to be tight, straight and very well laid out by the original stock maker. After several coats of true oil it looks amazing.

I was so pleased I decided to refinish all of them and I have one left to do. I found the second one has a light tiger stripe figure running the length of the stock with a light swirl grain on one side and straight grain on the other.


Please excuse the blurry cell phone pics.



I ordered Daisy 888 trigger guards to have adjustable trigger pull weight and I am polishing/cleaning the sears and hammers on all three.

I haven't approached the "Chief" yet, but I hope he will accept the rifles and put them to good use.

Conclusion:
Great job by the CMP. I couldn't be happier with the air rifles.

Check them out here: http://www.odcmp.com/Sales/rifles.htm Click on the Air Rifles tab and scroll down a bit.
Reply With Quote
  #2  
Old 07-09-2011, 09:23 AM
lindylars lindylars is offline
 
Join Date: Jun 2010
Location: FL when I'm not sent elsewhere
Posts: 197
Default

jnespappa - good job! Out of curiousity how are the left sides of the receivers marked?

The sights, while boxed when delivered, are already used in my opinion...

Here's a pic of the first five shots at 10m (sitting, no sling/jacket, t-shirt and shorts, outdoors) out of one that I picked up from the SS a couple months ago - no adjustments, cleaning, or anything beyond adding the two stock inserts and just taking the sight out of the box (which was NOT on mechanical-zero for either windage or elevation) and locking it down - POA is the bottom of the center square, front sight already had a post insert installed when I picked out the rifle:



Next shot after coming up 30-clicks elevation, no windage adjustments:



I really love this rifle - it has become my favorite, almost-daily, practice tool. I wish the CMP would come up with a similar pistol offering...hint, hint

The above shots were done using some old Daisy Max Speed pellets that I had on hand - you should also look into the Vogel match pellets available from the CMP at a very fair price.
__________________
Regards,
Ron

Last edited by lindylars; 07-09-2011 at 09:26 AM. Reason: Added front sight post insert comment
Reply With Quote
  #3  
Old 07-09-2011, 12:17 PM
jnespappa jnespappa is offline
 
Join Date: Jul 2011
Location: Lafayette, LA
Posts: 14
Default

Quote:
Originally Posted by lindylars View Post
jnespappa - good job! Out of curiousity how are the left sides of the receivers marked?
Thanks!!

They are all marked U.S. AG ####### 1 853 (Does the US mean they were military issue?)
The right sides are marked Rogers, AR

I am sending the serial numbers off to Daisy for dating since one of them is a 3 digit serial number, in the upper 600s.

Quote:
Originally Posted by lindylars View Post
The above shots were done using some old Daisy Max Speed pellets that I had on hand - you should also look into the Vogel match pellets available from the CMP at a very fair price.
Nice shooting. I will probably try Vogel on my next purchase. I am using RWS R10 Heavy match pellets right now and they are impressive.

I cleaned the barrels this morning using a bore snake and all three bores are still crisp and shiny.
Reply With Quote
  #4  
Old 07-09-2011, 04:07 PM
lindylars lindylars is offline
 
Join Date: Jun 2010
Location: FL when I'm not sent elsewhere
Posts: 197
Default

Quote:
Originally Posted by jnespappa View Post
They are all marked U.S. AG ####### 1 853 (Does the US mean they were military issue?)
The right sides are marked Rogers, AR

I am sending the serial numbers off to Daisy for dating since one of them is a 3 digit serial number, in the upper 600s.
Bingo - now a "good job" done WELL!

Look on the E-Store for target options if you want to get more "official" with your practice. Archer's also has some nice silent pellet traps.

Best wishes and good shooting to you and your future distinguished son
__________________
Regards,
Ron
Reply With Quote
  #5  
Old 07-11-2011, 11:15 AM
jnespappa jnespappa is offline
 
Join Date: Jul 2011
Location: Lafayette, LA
Posts: 14
Default

Quote:
Originally Posted by lindylars View Post
Bingo - now a "good job" done WELL!

Look on the E-Store for target options if you want to get more "official" with your practice. Archer's also has some nice silent pellet traps.

Best wishes and good shooting to you and your future distinguished son
Thanks!!

I received the new trigger guards and a few replacement triggers from Daisy on Saturday. Great service from them, BTW. Below is the new trigger guard with adjustment screw.


After doing the "Pilk Guns" trigger mod, the trigger pull is now MUCH improved, more crisp, more repeatable and with reduced over-travel. A caution from my experience with the noted mod. I cut the first trigger to match the Pilk Guns tutorial as best as I could. Reassembled and I could "fire" the rifle even with the safety on. Glad I order extra triggers. I cut the second one more conservatively and it is securely blocked when in "safe" mode.

Two down, one to go:





Prior to the trigger mods, I got my hands on some NRA AR5-10 targets and set up at 10 meters in the back yard with a plywood (temporary) backstop. I shot two 88s and an 89 from prone, with sling, sweatshirt, and glove. Now that the trigger mods are done I will try a few more targets for comparison and post the results.

Last edited by jnespappa; 07-11-2011 at 02:45 PM.
Reply With Quote
  #6  
Old 08-24-2011, 04:12 PM
Alby Alby is offline
 
Join Date: Sep 2010
Posts: 27
Post

Quote:
Originally Posted by jnespappa View Post
Thanks!!

I received the new trigger guards and a few replacement triggers from Daisy on Saturday. Great service from them, BTW. Below is the new trigger guard with adjustment screw.


After doing the "Pilk Guns" trigger mod, the trigger pull is now MUCH improved, more crisp, more repeatable and with reduced over-travel. A caution from my experience with the noted mod. I cut the first trigger to match the Pilk Guns tutorial as best as I could. Reassembled and I could "fire" the rifle even with the safety on. Glad I order extra triggers. I cut the second one more conservatively and it is securely blocked when in "safe" mode.

Two down, one to go:





Prior to the trigger mods, I got my hands on some NRA AR5-10 targets and set up at 10 meters in the back yard with a plywood (temporary) backstop. I shot two 88s and an 89 from prone, with sling, sweatshirt, and glove. Now that the trigger mods are done I will try a few more targets for comparison and post the results.
Those look great. I just ordered one for my grand daughter today. What did you use to strip the stocks? Also where did you order the trigger guards from, I cannot find any parts available?

thanks
Alby
Reply With Quote
  #7  
Old 09-13-2011, 01:04 PM
BubbaTheKid BubbaTheKid is offline
 
Join Date: Mar 2010
Location: IL
Posts: 476
Default

Quote:
Originally Posted by jnespappa View Post

They are all marked U.S. AG ####### 1 853 (Does the US mean they were military issue?)
The right sides are marked Rogers, AR

I am sending the serial numbers off to Daisy for dating since one of them is a 3 digit serial number, in the upper 600s.


I cleaned the barrels this morning using a bore snake and all three bores are still crisp and shiny.

Did you order "straight sotcks" or "Monty Carlo stocks"?
Reply With Quote
  #8  
Old 09-13-2011, 01:49 PM
ChadC ChadC is offline
 
Join Date: Nov 2009
Location: Monterey, PRK
Posts: 668
Default

Does Daisy offer this service? I would love to find out the manufacture date of these rifles. Should I send an email to customer service?
Reply With Quote
  #9  
Old 09-19-2011, 11:11 AM
jnespappa jnespappa is offline
 
Join Date: Jul 2011
Location: Lafayette, LA
Posts: 14
Default

Quote:
Originally Posted by BubbaTheKid View Post
Did you order "straight sotcks" or "Monty Carlo stocks"?
I ordered the straight stocks, since they matched the rifles currently in use by the NJROTC at the local HS. Monte Carlo stocks are nice, IMO for standing/off hand shooting, but may fall short for prone shooting depending on the shooters physical geometry.

You can ask the Daisy Museum folks to "date" your rifle by filling out a form and mailing it to them: http://www.daisymuseum.com/html/antiquegunform.htm
I sent my form in about two months ago and haven't heard back but you might have better luck.
Reply With Quote
  #10  
Old 07-14-2011, 08:55 PM
Ninja Piper Ninja Piper is offline
 
Join Date: Jun 2011
Posts: 53
Default

I was fondling these when I was down there on Monday and after reading your reviews, I'm kind of regretting not picking one up. I think I'll be ordering one soon...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:00 AM.