Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2019, 10:13 PM
sachst sachst is offline
 
Join Date: Mar 2012
Location: Clarksville, TN
Posts: 184
Default Gas Cylinder Screw Markings

Okay- a thread search here and usrifle30cal, and the Duff, Harrison, and Canfield
books are all over the map on this. Essentially, there is no consistency on when the poppet became THE assembly line screw, nor consistency on what letter codes are "proper" for wartime rifles. Answers on when the switchover totally occurred range from a flat 2.5m, 2.4m's show on the Duff data sheets with poppets, but markings aren't noted, and Duff's book indicates single slots were produced and probably used at least in part through the end of FY45. Likewise, on markings, Harrison pretty flatly states only a "p" on wartime poppets, with every variant being post-war. The other resources don't bring it any closer than listing the different variations. SO- finally the questions:
1. For a proper restoration for wartime ca. 2.4m up, what poppet valve letter codes work?
2. At what serial # point would it cease being proper to use a single slot screw?
3. Is there an ACCURATE best-practice resource to help with this, or is this another "lost to the mists of time" thing?
Tks-
Steve
Reply With Quote
  #2  
Old 11-21-2019, 08:50 AM
7,62x51mm 7,62x51mm is offline
 
Join Date: Oct 2009
Location: USA Illinois
Posts: 1,662
Default

I have what I believe to be an original SA 2.7 mil rifle (barrel is 1SA 4 44) that came from a veterans estate. Well used but everything is correct for the time period, anyway the gas cylinder screw is single slot while the follower rod is long fork.

The gas cylinder is wide base and round rear ring with a S stamp on top
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:31 PM.