CMP Forums

CMP Forums (
-   Utah (
-   -   Gas lock help (

MattGT35R 10-26-2014 05:44 PM

Gas lock help
I have a Garand that I am unable to get the gas lock plug off. I am looking to see if someone has the tool in Utah to take this off that also has the spline tool to keep the barrel from moving.

Orlando 10-26-2014 06:19 PM

Use a 1/4 inch drive ratchet with extension. Fits the cross slot gas screw perfectly

Craftsman 10-26-2014 10:14 PM

I like to use a gas cylinder wrench too, for tightening and loosening the plug. It takes the twisting stress off the barrel and splines. You can crank away with all your might, and no worries. Also use when tightening the front sight

TheyCallMeUTAH 10-30-2014 04:13 PM

Id buy that tool. Ive been procrastinating on buying one myself. If you get one let me know lol

MattGT35R 10-30-2014 11:07 PM

want to go half on one? :)

GGaskill 10-31-2014 06:50 PM

A large crescent wrench works well and does not damage the finish if you put a piece of paper between wrench and parts.

MattGT35R 11-02-2014 12:57 PM

Good call, thank you

MattGT35R 11-05-2014 02:00 PM

Quarter inch drive and crescent wrench worked like a charm.

Thank you

All times are GMT -5. The time now is 07:39 AM.