CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   CMP Bolt Action Rifles (http://forums.thecmp.org/forumdisplay.php?f=79)
-   -   03A4 Base Mounting Screws (http://forums.thecmp.org/showthread.php?t=277488)

ChuckyPete 02-23-2021 10:51 PM

03A4 Base Mounting Screws
 
I found a NOS Lyman/unmarked A4 base with the windage screws but lacking the mounting screws. I’ve seen listings on eBay for the Redfield torx or hex type but they’re not specific to the A3/A4 of course. Any sources for US made or original flathead screws?

John Beard 02-23-2021 11:48 PM

If you go to Numrich Gun Parts and look under Shop by Category / Gunsmithing Supplies / Gun Screws, they have 11 pages of gun screws. You may be able to find what you're looking for there.

Good Luck!

J.B.

Ben Tolson 02-24-2021 08:28 AM

Mounting Screw source
 
My local hardware store, "Do It Center", recently had their supplier add two boxes w/ 12 drawers labeled "gun screws"... various lengths, sizes, thread pitch, flat heads, domed heads even plug screws. Fillister slot, Philiip's & hex heads. Machine & wood screws. As far as finish, a few "blued", most were "black", some "in the white", a couple "case color". prices are very reasonable. quality has been good... btw, nice find on the base.

Col. Colt 02-24-2021 02:06 PM

Ace Hardware also has a section of "Gun Screws" and I bought a full selection of scope mounting/other gun screws in a plastic box at Cabelas a year or two ago. CC

chuckindenver 02-26-2021 12:13 PM

of the original type screws? no. unless you get lucky. for some 8/40 screws? yes. i get them in bulk off ebay


All times are GMT -5. The time now is 07:57 AM.