CMP Forums

CMP Forums (http://forums.thecmp.org/index.php)
-   M1 Carbine (http://forums.thecmp.org/forumdisplay.php?f=6)
-   -   Anyone here in west NC ? 'smith needed ... (http://forums.thecmp.org/showthread.php?t=277942)

ACampComLegacy 03-02-2021 05:18 PM

Anyone here in west NC ? 'smith needed ...
 
A guy in Yanceyville NC has snapped off the end of his Carbine barrel , and needs new barrel installed .

6 Ring 03-02-2021 05:32 PM

First question: Does he have a barrel?

Mike in NC 03-02-2021 05:40 PM

Second question: How do you "snap off" the end of a carbine barrel?

jmm 03-02-2021 05:57 PM

Quote:

Originally Posted by Mike in NC (Post 2021388)
Second question: How do you "snap off" the end of a carbine barrel?

Using it to break the steel straps on a pallet of ammo?
No wait, that was the other carbine....:rolleyes:

Kestrel4k 03-02-2021 06:11 PM

There was a 95% chance of posts asking for details, and a 5% chance of a post providing a solution to the original query. ;)

ACampComLegacy 03-03-2021 08:11 AM

Quote:

Originally Posted by Kestrel4k (Post 2021410)
There was a 95% chance of posts asking for details, and a 5% chance of a post providing a solution to the original query. ;)

Yep - spot on .

Silly me :o I shoulda' known such a Q warrants 20 Q's in return , and no answer .

Like callin' the bank , the utility company . You got 1 question ; gotta' answer 20 in turn (for security , etc. ) . And "this post may be recorded for quality assurance and training purposes"

But at least "due to LIGHT post volume , wait time wasn't extended" :rolleyes:

Det. Jason 714 03-03-2021 09:47 AM

I had Shuff put the barrel on my Rock-ola. Bit of a wait. I supplied the barrel.

Mike in NC 03-03-2021 10:04 AM

Just sent you a PM that contains contact information for a shop in Asheville, NC that may be able to replace a carbine barrel. I think they did one for a friend of mine.

I see this dealer at some of the shows that I am at. I thought I had his card, but spent some time looking for it without luck. I finally remembered the guy's name and did a search on the net and found his shop's contact information.

This forum is different than a bank or water department. The subscribers aren't paying for any service, we all just have an interest in this hobby and share knowledge when we can.

Please excuse the question of asking how a carbine barrel "snaps off". A carbine barrel is pretty stout and I just wondered how that happened.

I am in my late 60's, it took me a while to remember this dealer's name.

Quote:

Originally Posted by ACampComLegacy (Post 2021572)
Yep - spot on .

Silly me :o I shoulda' known such a Q warrants 20 Q's in return , and no answer .

Like callin' the bank , the utility company . You got 1 question ; gotta' answer 20 in turn (for security , etc. ) . And "this post may be recorded for quality assurance and training purposes"

But at least "due to LIGHT post volume , wait time wasn't extended" :rolleyes:


ACampComLegacy 03-03-2021 10:25 AM

Thanks Mike .

Just found out he's already ordered a barrel from CMP . 4 month service wait tho' , so he wants it done locally I presume ......

Said he bought it with a crack in it already , and posted this earlier :

https://scontent-iad3-1.xx.fbcdn.net...40&oe=60637321

Says he registered here , but cannot post ....................................

Mike in NC 03-03-2021 12:24 PM

Never seen anything like that. Almost looks like someone put an extension on the end of a barrel that had been cut off. I doubt that barrel was an original manufacture barrel and looks like a Frankenstein construction. There were some carbines that came out of Canada that had extensions added to the barrel to make them a legal length up North. Up there, I think rifle barrels have to be 18 inches instead of 16 inches.

Quote:

Originally Posted by ACampComLegacy (Post 2021624)
Thanks Mike .

Just found out he's already ordered a barrel from CMP . 4 month service wait tho' , so he wants it done locally I presume ......

Said he bought it with a crack in it already , and posted this earlier :

https://scontent-iad3-1.xx.fbcdn.net...40&oe=60637321

Says he registered here , but cannot post ....................................



All times are GMT -5. The time now is 04:48 PM.