View Single Post
  #5  
Old 01-01-2021, 04:56 PM
Quarterbore Quarterbore is offline
 
Join Date: Mar 2018
Location: Valley Forge, Pennsylvania
Posts: 264
Default

The easiest will be to buy a second upper. Just there are two issues, weight and your Colt lower pivot pin size. Your lower uses a large pivot pin. Colt made large pivot A3 flattop uppers for about a year but they have been rare to impossible to find for over 20-years.

Armalite and Daniel Defense filled the need for a few years but even those are very had to find anymore. Still, they do show up for sale and Iíve bought two of them over the past 25-years of watching.

https://www.bangersusa.com/product-d...ver-a3-315-pin

If you canít get a big hole upper, then there are adapter pins with bushings that will allow you to use a mil spec upper with your lower.

https://www.eabco.net/Colt-AR15M16-R...n_p_15090.html

Now, I tried to make weight with a 20-inch A4 flattop with a 20-inch A2 Gov Profile barrel along with a Vortex (PRS?) optic and my gun is still too heavy. I shoot for fun anymore as I have health challenges so it doesnít matter much but if you need to make weight you may well need to move down to a 16-inch upper. There just isnít a lot of room in the rules for a 20-inch AR and frankly the guys shooting carbines are doing great as long as yii ok i are shooting 100 or 200 yard reduced matches.

For long courses, I dig out my old 12-pound DCM match rifle with the much heavier barrel but clearly thatís not making the weight limited classes.
Reply With Quote